The AirTAC GFR600-25 AirTAC Filter Regulator 1 in NPT, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR600-25 is a size-600 filter regulator: it removes water and particulate from compressed air and sets downstream pressure in a single body. This configuration carries 1 in NPT ports, a 5 um filter element (the finer of the two published grades), a manual drain for the aluminium alloy bowl, an embedded square gauge reading in psi, and a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series is published in sizes 200, 300, 400 and 600 with a choice of drain type, 40 um or 5 um filtration, gauge scale, thread (PT standard, G and NPT as order options) and bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR600-25 AirTAC Filter Regulator 1 in NPT, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Feeds filtered, pressure-set air to spray booths and guns, where the 5 um element helps keep water and particulate out of the finish and the regulator holds a steady set pressure across a shift.
Supplies the cylinder and actuator circuits on carton-forming and case-taping equipment, combining water removal and pressure control at one 1 in take-off point on the main drop.
Conditions the shop-air feed to tool changers, clamps and pneumatic counters on a machining cell, with the psi square gauge giving the operator a direct read of set pressure.
Size 600 is the largest step in the GFR range, with 1 in ports for the highest flow band in the family - match it against your line's air demand, and ask us to check the published flow curve before ordering. This unit pairs the 5 um element with a manual drain: choose manual where an operator can bleed the bowl on a routine walk-round, or step to automatic or differential-pressure drain where the unit is hard to reach. The square gauge here reads psi; MPa and bar scales are also published options.
Thread is NPT on this code; PT is the catalogue standard and G (BSPP) is available to order. A mounting bracket is included. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing from the datasheet before you commit.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so there is no one figure we can quote. Send us your application details and we will confirm the relevant datasheet figures on request before you order.
Manual drain means an operator opens the bowl drain to expel collected water on a routine basis. It suits units mounted where they are easy to reach as part of a regular check; for hard-to-access installations, the automatic or differential-pressure drain options are worth considering instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.