The AirTAC GFR60025JF2W AirTAC Filter Regulator 1 in PT, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025JF2W is a size-600 filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in one body. This configuration has a 1 in PT port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain that bleeds collected condensate whenever the pressure drop across the element rises, an embedded square gauge reading in psi, and no mounting bracket. The aluminium alloy bowl suits the larger 600 frame, and the maximum inlet pressure is 1.0 MPa (145 psi) with a working temperature of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um standard or 5 um (W) filtration, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow for this model is published as curves rather than a single rating, so ask us to confirm the datasheet figures against your application.
| Model | GFR60025JF2W AirTAC Filter Regulator 1 in PT, 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Filtered, regulated air at each paint-line drop keeps spray guns supplied with clean air at a steady setpoint, protecting finish quality across the shift.
A 5 um element and stable regulated pressure feed analytical instruments and pneumatic test rigs that are sensitive to dirt and pressure drift.
Regulated air to stopper and gate cylinders on a bottling conveyor keeps indexing consistent, while the filter element sheds water carried in from the compressor.
Step up through sizes 200, 300, 400 and 600 as your required flow and port grow; this unit is the 600 frame with a 1 in PT connection. Choose the drain to match maintenance access: differential-pressure (as fitted here) drains automatically under flow, automatic drains on a timed or level basis, and manual drains need an operator. Pick 40 um for general protection or 5 um (this unit) where finer particulate removal matters, and set the gauge scale to MPa, psi or bar - this one reads psi. PT is the standard thread; G and NPT are catalogue options to order, and a bracket can be added if panel mounting is needed.
Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR600 series as curves, not as a single rated number, so we do not quote a figure here. Tell us your working pressure and air demand and we will confirm the flow from the datasheet on request before you order.
The W code in GFR60025JF2W selects the finer 5 um filtration instead of the 40 um standard, for applications that need cleaner air. The blank drain position is the differential-pressure drain, which automatically discharges collected condensate as the pressure drop across the element rises - no manual draining in normal operation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.