The AirTAC GFR60025JF2WG AirTAC Filter Regulator G1 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025JF2WG is a size-600 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration has a G1 (1 in) G-thread port, a 5 um filter element (the finer of the two published grades), a differential-pressure drain, a square pressure gauge reading in psi, and a standard regulator with an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Because this is the 600 size, the bowl is aluminium alloy, and the J code means no mounting bracket is included.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard; G and NPT as order options), drain types, filter grades and gauge scales, so a configuration can be matched to most general industrial air-preparation duties. Flow is published as curves rather than a single rated figure, so send us your application and we will confirm the datasheet figures on request before you order.
| Model | GFR60025JF2WG AirTAC Filter Regulator G1 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Installed at the 1 in drop from a plant compressor ring, it strains water and 5 um particles out of the header air and holds a set header pressure for the whole line, with the psi gauge giving a local reading at the panel.
Feeding the air supply to conveyor gate and diverter cylinders, it keeps grit and condensate out of the cylinder seals and lets the line set one steady operating pressure for consistent gate actuation.
Placed ahead of a pneumatic press or clamping fixture, it filters the shop air to 5 um and lets the operator dial in the clamping pressure within the 0.15-0.9 MPa range, reading the setpoint directly off the square psi gauge.
For sizing, step through the real, decodable choices. Size 600 with a G1 (1 in) port is the largest GFR frame, so start here when your line flow points to a 1 in connection; smaller sizes 200/300/400 cover the smaller ports. This unit carries the 5 um element (code W) instead of the 40 um standard - choose 5 um where downstream valves, cylinders or instruments need finer filtration, and 40 um where general water and chip removal is enough. Drain is differential-pressure (the default), which bleeds collected condensate automatically as the pressure differential changes; automatic and manual drains are available on other configurations. The square gauge reads in psi, with MPa and bar scales and an external round gauge available as options. Thread is G (BSPP); PT is the standard thread and G/NPT are order options. Note the J code: no mounting bracket is supplied.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a flow figure here. Ask us to confirm the datasheet flow against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves rather than a single rated figure, so we do not quote a flow number for this unit. Send us your line pressure, port size and expected air demand, and we will confirm the datasheet flow figures on request so you can check the GFR600 against your application before ordering.
The W code in GFR60025JF2WG selects the optional 5 um filter grade; the standard grade is 40 um. The 5 um element removes finer particles for downstream valves, cylinders and instruments, while 40 um is sufficient for general water and chip removal. Both grades are available across the GFR range, and this unit also carries the differential-pressure drain that bleeds collected condensate automatically.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.