The AirTAC GFR60025LJC2WG AirTAC Filter Regulator G1 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025LJC2WG is a size-600 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a G1 (1 in) G-thread port, a 5 um filter element (the finer of the two published grades), a differential-pressure drain that bleeds collected condensate automatically as flow passes through, and a low-pressure regulator type. An external round gauge with a psi scale is fitted, and the 600-size bowl is aluminium alloy. No mounting bracket is included and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and can be ordered with manual or automatic drains, a 40 um or 5 um element, square or round gauges with MPa, psi or bar scales, G or NPT threads, and with or without a bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR60025LJC2WG AirTAC Filter Regulator G1 5 um |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Filtered, low-pressure-regulated air feeding pneumatic clamps and fixtures on a machining centre, where the 5 um element helps keep fine debris out of clamping valves.
Air preparation for conveyor stops, pushers and diverters on a bottling line, with the differential-pressure drain clearing condensate through shift after shift.
Conditioning the air supply to a lab's pneumatic valve manifold or sample-handling actuators, where the psi-scaled gauge gives a readable setpoint and the 5 um grade suits sensitive components.
Size 600 with a G1 (1 in) port is the largest step in the GFR range, so start here when your line's porting is 1 in and let the published flow curves - which we confirm on request - settle the sizing. This unit carries the 5 um element; choose it when downstream valves, cylinders or instruments need finer filtration than the standard 40 um grade. The differential-pressure drain needs no operator attention, but if you prefer a scheduled manual blowdown or a fully automatic drain, those variants can be ordered. The fitted round gauge reads in psi; square gauges and MPa or bar scales are alternatives. Thread is G (BSPP) here, with PT standard and NPT available as order options. Note that no mounting bracket is included with this code, and this is the low-pressure regulator type - its exact regulation range is not published in the catalogue, so confirm it with us against your set pressure before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a l/min or SCFM number. Tell us your application and we will confirm the flow and sizing from the datasheet on request before you order.
This code is the low-pressure regulator type; its exact regulation range is not published in the catalogue, so confirm it with us against your set pressure. Condensate is handled by the differential-pressure drain, which bleeds the aluminium alloy bowl automatically as air flows through - no manual blowdown is needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.