The AirTAC GFR60025MF2WG AirTAC Filter Regulator G1 1 in is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025MF2WG is a GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body. This size-600 unit is fitted with a G1 (1 in) port, a 5 um filter element (code W, finer than the 40 um standard), a manual drain on the aluminium alloy bowl, and a standard-type regulator with an adjustment range of 0.05-0.9 MPa (7-130 psi). The embedded square gauge is supplied with a psi scale, a mounting bracket is included, and no reverse/check valve is fitted. Maximum working (inlet) pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600, with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, 40 um or 5 um filter elements, gauge scales in MPa, psi or bar, and PT, G or NPT threads as catalogue options. Because flow is published as curves rather than a single rated figure, we confirm the datasheet and flow figures for your application on request.
| Model | GFR60025MF2WG AirTAC Filter Regulator G1 1 in |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 5 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Point-of-use conditioning for spray-booth and paint-line circuits: the 5 um element and regulation in one body protect finishing air at the booth drop, with the manual drain emptied during shift checks.
Filtered, regulated air for conveyor stops, pushers and gating cylinders on a bottling or canning line, where the 1 in port feeds a high-demand header serving multiple stations.
Clean, pressure-stable supply to pilot plants and test rigs, where the 5 um grade and a set regulated pressure keep instruments and pneumatic controls on a repeatable air quality.
Sizing starts with the port step: this unit is the size-600 body with a G1 (1 in) port, the largest in the GFR range, so step down to GFR200/300/400 if your line runs smaller ports and lower air demand. The 5 um element (code W) suits downstream equipment that needs finer filtration than the 40 um standard; choose the standard grade where coarse protection is enough. The manual drain means an operator opens the bowl drain periodically - pick automatic or differential-pressure drain codes if you want unattended condensate removal. The square gauge is fitted here with a psi scale; MPa and bar scales are available, and an external round gauge is optional. Thread: PT is the AirTAC standard, with G and NPT as order options - this code carries the G thread. A mounting bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure, set pressure and air demand, and we will confirm the flow and datasheet figures for this exact model on request before you order.
The M in the code specifies a manual drain: condensate collected in the aluminium alloy bowl is released by opening the drain by hand, which suits attended installations on a maintenance round. If the unit will run unattended, the automatic (A) or differential-pressure (blank) drain codes remove condensate without operator action - ask us to quote that variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.