The AirTAC GFR60025MJC2 AirTAC Filter Regulator PT1 in, psi Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR60025MJC2 is a size-600 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in a single body. This configuration carries a PT1 (1 in) PT thread, a manual drain bowl in aluminium alloy, a 40 um standard filter element, and an external round gauge scaled in psi. The standard regulator covers 0.05-0.9 MPa (7-130 psi) with the manual-drain version, and the unit is rated to 1.0 MPa (145 psi) maximum inlet at -5 to 70 C (non-freezing). No mounting bracket is included on this variant.
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options including automatic or manual drains, a 5 um (code W) element, G or NPT threads, gauge scale in MPa, psi or bar, and a reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us to confirm flow and datasheet figures for your application before ordering.
| Model | GFR60025MJC2 AirTAC Filter Regulator PT1 in, psi Gauge |
|---|---|
| Series | GFR600 filter regulator |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR600 | G-series filter regulator, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR600 · PT1" · 40 µm |
|---|---|
| One size down | GFR400 |
| Add lubrication | GFC600-25 (two-unit set) |
Drops the 1 in shop-air header down to a stable working pressure for a production cell, while the 40 um element strips water and pipe scale carried in the main line.
Feeds cylinders and actuators on a cartoning or palletising conveyor with filtered, regulated air, with the psi gauge letting line staff verify setpoint at a glance.
Supplies regulated air for brake-testing rigs and pneumatic tool stations in a heavy-vehicle workshop, with the manual drain emptied as part of the daily bay check.
Start with the size and port: size 600 with a PT1 (1 in) connection is the largest step in the GFR range, suited to lines where the supply port is 1 in and the required flow sits at the top of the series. Match the drain to your maintenance routine: this unit has a manual drain, which needs periodic bowl draining but allows the widest 0.05-0.9 MPa (7-130 psi) regulation range; automatic and differential-pressure drains are available on other variants. The 40 um element is the standard grade; specify code W if you need 5 um. This version carries a round external gauge scaled in psi (MPa and bar scales are also catalogued) and no mounting bracket (code J); brackets are optional. Thread is PT as standard, with G (BSPP) and NPT available to order.
Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowl on the GFR600 suits harsher environments than a PC bowl. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, set pressure and expected air demand, and we will confirm the flow from the datasheet for this exact configuration before you order.
The M in the code specifies a manual drain bowl, which you empty periodically instead of relying on an automatic mechanism. On this GFR configuration the manual-drain regulator covers 0.05-0.9 MPa (7-130 psi), the widest adjustment range in the series. If you would rather not drain by hand, automatic and differential-pressure drain variants are available.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.