Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM
The AirTAC Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM
The B06-MIC20X350SCM is AirTAC's battery-manufacturing dedicated variant of the MIC20X350SCM round-body mini cylinder. The B06- prefix marks it for cell, module, and pack assembly lines, but mechanically it is identical to the base model: a double-acting, stainless-steel barrel and rod construction with a riveted, rolled build that shrugs off mild corrosion and washdown. Its defining feature is the variable air cushion at both ends - a needle-set deceleration zone that absorbs high-speed end-of-stroke shock, protecting delicate battery components and cutting cycle noise.
With a 20 mm bore, this cylinder delivers 157 N push and 131.9 N pull at 0.5 MPa, rising to 219.8 N push at 0.7 MPa. For a typical battery-handling application, a safe working load is about 94 N (roughly 60% of the 0.5 MPa push force), and it can lift approximately 8 kg vertically with a 2:1 safety margin. The ISO 6432 mounting interface means it drops into standard mini-cylinder brackets and clevises, simplifying spares and design. The -S magnet is built in, so CMSG, DMSG, or EMSG sensors can be fitted for position confirmation. Air port is 1/8" PT or G thread.
Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM Technical Specifications
| Model | Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM Is Used
Cell Stacking Press
Use the 157 N push at 0.5 MPa to gently stack battery cells. The adjustable air cushion at both ends prevents hard impacts that could dent cell casings or damage separator layers.
Tab Positioning Slide
The 131.9 N pull force at 0.5 MPa retracts tab alignment fixtures. The needle-set cushion absorbs the return stroke shock, keeping tab positioning repeatable at speeds up to 800 mm/s.
Module Assembly Stop
Position module housings with the 219.8 N push at 0.7 MPa. The built-in -S magnet lets a CMSG sensor confirm full extension, while the cushion protects the housing from end-of-stroke bounce.
Is the Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM the Right Cylinder?
Sizing this B06-MIC20X350SCM for a battery line starts with the load: at 0.5 MPa it pushes 157 N and pulls 131.9 N, so a 94 N working load leaves a healthy margin. If you need more force, step up to the MIC25X100 - that bore pushes 245.3 N at 0.5 MPa. If the application is lighter, the MIC16X50 pushes 100.5 N at 0.5 MPa but lacks the cushion refinement of this 20 mm bore. The adjustable air cushion is the key differentiator for high-speed pick-and-place or stacking operations where hard stops can damage cells or weld tabs.
Remember, this cylinder does not hold its load on air loss - the piston drifts, and the cushion only decelerates near stroke end, it is not a lock or brake. For a held position, add an external rod lock or a pilot-operated check valve. The CM back cover is fitted, and the -S magnet allows CMSG, DMSG, or EMSG switch mounting. With the ISO 6432 interface, standard mini-cylinder brackets and clevises fit directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM FAQ
At 0.5 MPa, push is 157 N and pull is 131.9 N. At 0.7 MPa, push rises to 219.8 N and pull to 184.7 N. The theoretical maximum force at 1.0 MPa is 32 kgf. Operating pressure range is 0.15-1.0 MPa, with a proof pressure of 1.5 MPa.
B06- is AirTAC's designation for battery-manufacturing dedicated cylinders. The B06-MIC20X350SCM is mechanically identical to the standard MIC20X350SCM - same bore, stroke, force, and port - just framed for cell and module assembly lines. The adjustable air cushion at both ends uses a needle to control deceleration near stroke end, reducing shock and noise. It is not a lock or brake; the piston drifts on air loss. The -S magnet is built in for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-MIC Battery Dedicated Cylinder B06-MIC20X350SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.