Airtac HGS Micro Precision Slide Table Cylinder HGS10X15
2、High-strength alloy steel quick-connect pins ensure superior wear resistance and extended service life.
3、Optional stroke adjustment mechanism compatible with direct replacement of hydraulic actuators.
4、Precision-ground rails deliver exceptional linear accuracy (±0.03mm) and non-rotation stability.
5、Comprehensive series configuration with high-strength optional accessories for customized solutions.
6、Integrated positioning holes and adjustment grooves optimize installation precision while maintaining positioning consistency during repeated disassembly.
（For custom stroke requirements exceeding standard specifications, please consult our engineering team）
Category: Precision Slide Cylinder | Brand: AIRTAC | Series: HGS
AirTAC HGS Miniature Precision Slide Cylinder HGS10X15 Technical Details
- Model: HGS10X15
- Bore size: 10mm
- Stroke: 15mm
- Operating pressure: 0.05-0.7 MPa
- Temperature range: -10℃ to 70℃
- Cushion type: Fixed rubber buffer
- Mounting style: Side/Flange mounting (M3 screw holes)
- Repeat positioning accuracy: ±0.01mm
- Piston rod material: Stainless steel (SUS304)
- Tube material: Aluminum alloy (hard anodized)
- Seal material: NBR/HNBR optional
- Weight: 85g ±2g
- Dimensions: 76mm(L) × 20mm(W) × 16.5mm(H)
- Rod end thread: M3×0.5
- Max speed: 500mm/s
- Lubrication: Pre-lubricated (Grease-free operation)
Ultra-compact linear actuator combining cylinder and guide mechanism, featuring integrated ball bearing slides for smooth linear motion. The dual-shaft design with chromium-plated guide rods ensures exceptional lateral load capacity (3.5N·m max moment) while maintaining micron-level positioning stability. Optimized for cleanroom environments with minimal particle generation.
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Lens positioning in optical inspection equipment
- Precision clamping in medical device manufacturing
- Automated test probe positioning systems
Installation recommendation:
Use vibration-resistant thread lockers for mounting screws. Maintain 0.5mm minimum clearance between sliding surfaces and adjacent components. For optimal performance, pair with filtered air supply (5μm or finer) and install air dryer when operating below 5℃ dew point.
| Property | Property Value |
|---|---|
| sku | HGS10X15 |
| Bore Diameter | <10mm> |
| Stroke | <15mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.