Airtac MIC Cushioned Mini Cylinder MIC16X125SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X125SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 125mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke125 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X125SCA
Built for light-duty automation, this stainless-steel round-body mini cylinder delivers precise motion control with a 16 mm bore and 125 mm stroke. As a double-acting actuator, it generates 100.5 N of push force at 0.5 MPa, making it ideal for compact assemblies. The integrated CA rear pivot cover simplifies clevis mounting, while the M5×0.8 port ensures efficient airflow. An onboard piston magnet (-S) enables seamless position sensing with CMSG, DMSG, or EMSG switches.
What sets this unit apart is its adjustable air cushion at both ends, allowing you to tune end-of-stroke deceleration and eliminate the harsh impact typical of bumper-style minis. The stainless barrel and rod resist mild corrosion and washdown environments. Based on the 0.5 MPa push rating, it handles a safe working load of roughly 60 N, lifting about 5.1 kg vertically with a 2:1 safety margin. It conforms to ISO 6432 mounting dimensions for easy bracket interchange.
Airtac MIC Cushioned Mini Cylinder MIC16X125SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X125SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 125 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X125SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X125SCA Is Used
Small Parts Ejection
Uses its 100.5 N push force to reliably knock small molded parts out of a fixture, while the adjustable cushions prevent bounce at rapid cycle rates.
Package Diverting
Sweeps lightweight cartons on a conveyor line where the 5.1 kg vertical lift capacity and smooth end-of-stroke damping protect fragile packaging edges.
Lab Sample Routing
Moves delicate test tubes between stations with a 125 mm stroke, relying on the stainless build and tuned air cushions to avoid liquid spills.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X125SCA the Right Cylinder?
When sizing this 16 mm bore actuator, consider stepping up to the MIC20X50 if your application requires more thrust, as the 20 mm bore provides 157 N of push force at 0.5 MPa. Conversely, if your force needs are minimal and high-speed shock is not a concern, the smaller MI series relies on fixed rubber bumpers rather than adjustable cushions. The variable needle cushions on this model are essential when cycling at high speeds or moving fragile payloads, as they smoothly decelerate the piston near the stroke ends.
Remember that the air cushion only decelerates the load; it does not function as a brake. If the air supply drops, the piston will drift, so you must add an external rod lock or pilot-operated check valve for fail-safe load holding. This SKU includes the -S magnet for sensors and features a CA back cover, so pair it with matching CMSG, DMSG, or EMSG switches and appropriate pivot hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X125SCA FAQ
This 16 mm bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread. At 0.5 MPa it provides 100.5 N of push force and 86.4 N of pull force. At 0.7 MPa, push increases to 140.7 N and pull to 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and does not act as a locking brake. If air pressure is lost, the piston will drift. For vertical load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X125SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.