Airtac MIC Cushioned Mini Cylinder MIC16X70SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X70SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 70mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke70 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X70SCA
Built for rapid, shock-sensitive tasks, the AirTAC MIC16X70SCA is a double-acting round-body mini cylinder with a 16 mm bore and 70 mm stroke. Its stainless-steel barrel and rod shrug off mild corrosion, while the CA rear pivot cover simplifies clevis mounting. A needle-set air cushion at both ends soaks up end-of-stroke impact, running quieter than a fixed bumper.
Delivering 100.5 N push at 0.5 MPa, it yields a safe working load of about 60 N and lifts roughly 5.1 kg vertically with a 2:1 margin. It uses an M5×0.8 port and an M6x1.0 male rod thread. Because this SKU includes the -S magnet, you can fit CMSG, DMSG or EMSG sensors directly.
Airtac MIC Cushioned Mini Cylinder MIC16X70SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X70SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 70 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X70SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X70SCA Is Used
Light Parts Ejection
Cushioned end-of-stroke deceleration protects delicate plastic parts from cracking when ejected at high speed.
Package Diverting
The 60 N safe working load easily pushes small cartons off a belt, while the stainless rod resists washdown.
Small Component Sorting
CMSG sensors track the 70 mm stroke precisely to index tiny electronic components into testing trays.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X70SCA the Right Cylinder?
For lighter duty, the MI bumper mini lacks adjustable cushions; for heavier loads, step up to the MIC20 (157.0 N push @0.5 MPa). Choose this 16 mm bore when you need ISO 6432 mounting interchangeability and high-speed cycling where tuning the end-of-stroke deceleration protects the payload.
The air cushion only decelerates near the stroke end and does not lock the rod. If you must prevent drift on air loss, add an external rod lock or pilot check valve. Mount it via the CA clevis, LB foot, FA flange or TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X70SCA FAQ
This 16 mm bore cylinder has an M5×0.8 port and an M6x1.0 male rod thread. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, with a theoretical max of 20.5 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end to reduce shock; it is not a brake, so use an external rod lock for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X70SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.