Airtac MIC Cushioned Mini Cylinder MIC20X95SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X95SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X95SU
Dial in end-of-stroke deceleration with the AirTAC MIC20X95SU, a double-acting round-body mini cylinder built for high-speed actuation. A needle-set variable air cushion at both ends absorbs shock, protecting your payload far better than a fixed rubber bumper. The stainless-steel barrel and Ø8 mm piston rod resist mild corrosion and washdown environments.
Delivering 157 N of push and 131.9 N of pull at 0.5 MPa, this ISO 6432 mounting-interface unit handles a safe working load of roughly 94 N. That translates to lifting about 8 kg vertically with a 2:1 safety margin. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches, while the U 90-degree rear cover simplifies port and mounting orientation. Air connects via a 1/8" port.
Airtac MIC Cushioned Mini Cylinder MIC20X95SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X95SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X95SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X95SU Is Used
Package Diverting
Uses the 157 N push stroke to deflect light cartons at high speed, relying on the adjustable cushion to stop the rod smoothly without slamming.
Small Part Ejection
Ejects machined components from a fixture; the stainless build handles light cutting fluid splash while the cushion softens the ejection impact.
Vertical Lift Stops
Raises an 8 kg jig vertically; the U rear cover provides a clean 90-degree mount while the cushion prevents the load from crashing at the top.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X95SU the Right Cylinder?
If you need less force, dropping to an Ø16 bore lowers the push force to 100.5 N at 0.5 MPa. Stepping up to a Ø25 bore increases push force to 245.3 N. Choose this Ø20 model when cycle speeds demand the adjustable air cushion to prevent harsh impacts. The cushion only decelerates the load near the stroke end; it does not function as a brake. To prevent drift on air loss, add an external rod lock or pilot-operated check valve. Pair it with LB foot, FA flange, or TC trunnion mounts to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X95SU FAQ
This double-acting cylinder pushes at 157 N and pulls at 131.9 N at 0.5 MPa. At 0.7 MPa, push is 219.8 N and pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa. It features a 1/8" air port and an M8x1.25 male rod thread.
Yes. Because this SKU includes the -S magnet, you can mount CMSG, DMSG, or EMSG switches directly to the round body for reed or electronic sensing. The adjustable air cushions at both ends merely decelerate the load and do not lock or hold the piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X95SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.