Airtac MIC Cushioned Mini Cylinder MIC25X10CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X10CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X10CM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles short 10 mm strokes with precision. The CM round rear cover keeps ports neatly oriented, while the 1/8" porting matches the Ø25 mm bore class. Built to the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises.
A defining feature is the adjustable air cushion at both ends, letting you tune a needle valve to absorb end-of-stroke shock at high speeds up to 800 mm/s. The stainless barrel and rod resist mild corrosion and washdown environments. With a safe working load of roughly 147 N, it can lift about 12.5 kg vertically using a 2:1 safety margin. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC25X10CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X10CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X10CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X10CM Is Used
Short-Stroke Clamping
Ideal for holding light metal components during machining, using its 10 mm stroke and 245 N of thrust to secure parts firmly without overshooting.
Flap Deflection
Provides a fast, cushioned tap to fold carton flaps on packaging lines, where the adjustable air cushion prevents slamming at high cycle rates.
Small Part Ejection
Ejects molded plastic parts from tight fixtures, leveraging the stainless build to withstand occasional mist exposure in light washdown zones.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X10CM the Right Cylinder?
For lighter duties, the MIC20 bore drops to 157 N push at 0.5 MPa, whereas stepping up to the MIC32 raises output to 402 N. Choose this Ø25 model when your application needs that middle-ground thrust in a compact ISO 6432 form. The dual adjustable cushions are essential when moving loads at high velocity, as they decelerate the piston smoothly without harsh impacts.
Keep in mind the air cushion only slows the piston near the end of travel; it does not lock or hold the load. If air pressure drops, the rod will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Because this specific code has no -S suffix, position sensing is not possible without switching to the magnet-equipped variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X10CM FAQ
This Ø25 mm bore cylinder features a 1/8" port and a male M10x1.25 rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot support CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. It still features adjustable air cushions at both ends and a stainless steel build for mild corrosion resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X10CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.