Airtac MIC Cushioned Mini Cylinder MIC25X125U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X125U is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke125 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X125U
Designed for high-speed actuation, this stainless-steel round-body mini cylinder uses a needle-set variable air cushion at both ends to absorb end-of-stroke shock. As a double-acting unit, the MIC25X125U pushes with 245.3 N and pulls with 206.1 N at 0.5 MPa. It features a 25 mm bore, a 125 mm stroke, a 1/8 inch port, and a 90-degree U rear cover for compact mounting. The stainless barrel and rod resist mild corrosion and washdown environments.
Dropping into standard mini brackets via its ISO 6432 mounting interface, it offers a safe working load of about 147 N. This equates to lifting roughly 12.5 kg vertically with a 2:1 safety margin. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without upgrading to the -S variant. The cushion only decelerates the load near stroke end; it is not a lock or brake.
Airtac MIC Cushioned Mini Cylinder MIC25X125U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X125U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X125U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X125U Is Used
Package Diverting
Uses the 245.3 N push force to deflect medium-weight cartons on a sorting line, with the adjustable cushion softening the 125 mm stroke impact at high speed.
Flap Folding
Drives packaging flaps rapidly into position where the 90-degree U cover allows tight rear clearance and the needle-set cushion prevents jarring at stroke end.
Light Lift Gates
Lifts roughly 12.5 kg vertically using a 2:1 safety margin, relying on the stainless build for mildly humid storage environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X125U the Right Cylinder?
When sizing this 25 mm bore, stepping down to the MIC20 drops the 0.5 MPa push force to 157 N, while stepping up to the MIC32 raises it to 402 N. Choose this 125 mm stroke model when moving loads at high speed where the adjustable needle cushions can be tuned to prevent harsh impacts. If you need position feedback, select the -S magnet version to enable CMSG, DMSG, or EMSG switches.
Because a standard cylinder drifts when air pressure is lost or a valve is centered, do not rely on the cushion to hold a load. The air cushion strictly decelerates the piston near the stroke endpoints. For suspended or vertical loads that must maintain position during air loss, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X125U FAQ
This double-acting cylinder has a 25 mm bore, a 1/8 inch port, and a male M10x1.25 rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG, or EMSG switches. You must select the -S variant for sensor compatibility. The stainless build and adjustable air cushions function identically across both versions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X125U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.