Airtac MIC Cushioned Mini Cylinder MIC25X150CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X150CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X150CM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for rapid cycling. The defining feature of the MIC series is the adjustable air cushion at both ends, letting you dial in a needle valve to absorb end-of-stroke shock and reduce noise at high speeds. The CM round rear cover provides a clean back-end profile for straightforward port and mounting orientation.
With a 25 mm bore and 150 mm stroke, it yields a safe working load of roughly 147 N and lifts about 12.5 kg vertically with a 2:1 safety margin. It uses a 1/8" port and an M10x1.25 male rod thread. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors. The stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MIC Cushioned Mini Cylinder MIC25X150CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X150CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X150CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X150CM Is Used
High-Speed Diverting
Routes small packages on a belt line using its 245 N push force, relying on the adjustable cushion to stop the 150 mm stroke smoothly without slamming.
Carton Flap Folding
Folds corrugated flaps at pace, where the needle-set cushion absorbs the shock of repeated high-speed impacts to protect the packaging mechanics.
Light Pallet Push-Off
Pushes lightweight components off an assembly pallet, lifting loads up to 12.5 kg vertically while the stainless build handles dusty shop environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X150CM the Right Cylinder?
When sizing this actuator, consider the adjacent bores in the range. If your load is lighter, the MIC20 offers 157 N of push at 0.5 MPa; if you need more muscle, the MIC32 steps up to 402.2 N. The adjustable cushion proves its worth when driving heavier masses at high speeds, preventing harsh impacts that a fixed bumper cannot adequately absorb.
This model conforms to the ISO 6432 mounting interface for standard mini-cylinder brackets. Note that the air cushion only decelerates the piston near the stroke end—it is not a lock. If you must prevent drift on air loss, install an external rod lock or pilot check valve. For position sensing, select the -S magnet variant instead of this base model.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X150CM FAQ
This 25 mm bore cylinder uses a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. You must choose the -S variant to use CMSG, DMSG, or EMSG switches. The adjustable air cushion at both ends only decelerates the load near stroke end and does not lock or hold the piston in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X150CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.