Airtac MIC Cushioned Mini Cylinder MIC25X175SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X175SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X175SCM
Dial in end-of-stroke deceleration with the AirTAC MIC25X175SCM, a double-acting round-body mini cylinder built around a stainless-steel barrel and rod for reliable mild-corrosion resistance. Tuning the needle valve at both ends absorbs high-speed shock, protecting your payload far better than a fixed rubber bumper. The CM round rear cover keeps ports neatly oriented for tight assemblies.
In the 25 mm bore class, this ISO 6432 mounting-interface unit generates 245.3 N of push and 206.1 N of pull at 0.5 MPa, peaking at a theoretical 50 kgf. That translates to a safe working load of roughly 147 N, letting you lift about 12.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread secure the pneumatic and mechanical connections, while the built-in -S magnet supports CMSG, DMSG and EMSG position sensing.
Airtac MIC Cushioned Mini Cylinder MIC25X175SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X175SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X175SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X175SCM Is Used
High-Speed Carton Diverting
Uses the 245.3 N push force to deflect light packaging at speed, while the adjustable cushion prevents the 175 mm stroke from slamming violently at the end of travel.
Light Press Assembly
Applies up to 50 kgf theoretical force to seat small bearings, relying on the stainless construction to withstand occasional coolant splash in machining cells.
Vertical Parts Lift
Raises 12.5 kg wipper bins through 175 mm, using the needle-set deceleration to drop the load gently into position without a hard mechanical bounce.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X175SCM the Right Cylinder?
If you need less force, the MIC20X50 class supplies 157 N push at 0.5 MPa; stepping up to the MIC32 bore yields 402 N when this 245.3 N unit is undersized. The adjustable air cushion matters most when driving heavier masses at high speeds, as the needle setting prevents harsh impacts that would otherwise damage tooling. This cylinder cannot hold a load on air loss, so add an external rod lock or pilot check valve if drift is unacceptable. Pair the -S magnet with CMSG/DMSG/EMSG switches for feedback, and utilize LB foot, FA flange, SDB pivot or TC trunnion mounts to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X175SCM FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It delivers 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The included -S magnet allows CMSG, DMSG and EMSG switches to track position, but the air cushion only decelerates the stroke end and acts as neither a lock nor a brake. The piston will drift on air loss, so install an external rod lock or pilot check valve for vertical holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X175SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.