Airtac MIC Cushioned Mini Cylinder MIC25X190SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X190SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 190mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke190 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X190SCA
Tuned for rapid cycling, the MIC25X190SCA relies on a needle-set variable air cushion at both ends to decelerate the piston smoothly, eliminating the harsh impact typical of bumper mini cylinders. This double-acting, round-body stainless unit carries a 190 mm stroke and uses an M10x1.25 male rod thread with a 1/8" air port.
Generating 245.3 N of push and 206.1 N of pull at 0.5 MPa, it fits mid-range force tasks perfectly, lifting about 12.5 kg vertically with a 2:1 safety margin. The rolled stainless barrel resists mild washdown corrosion, while the CA rear pivot cover simplifies clevis mounting. Because this is an ISO 6432 bore, it drops directly into standard mini-cylinder brackets.
Airtac MIC Cushioned Mini Cylinder MIC25X190SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X190SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 190 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X190SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X190SCA Is Used
Package Diverting
Pushes lightweight cartons at high cycle rates on a sorting line, using the adjustable cushion to halt the 190 mm stroke gently without jarring the products.
Small Press Ejection
Provides 245.3 N of push force to eject stamped parts, relying on the stainless build to withstand light cutting fluid splashes.
Vertical Lift Gates
Raises a 12 kg access flap using the CA clevis mount, decelerating smoothly at the top to protect the hinge mechanism from shock.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X190SCA the Right Cylinder?
When sizing around this 245.3 N @0.5 MPa class, stepping down to the MIC20 drops output to 157 N, whereas the MIC32 jumps to 402 N. The adjustable cushion proves essential when moving heavier masses at high speeds up to 800 mm/s, as it prevents end-of-stroke banging without relying on rubber bumpers.
The included -S magnet enables CMSG, DMSG, or EMSG sensors for position tracking. Remember that the air cushion only decelerates the load near the stroke end; it is not a brake. If you need to hold position during air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X190SCA FAQ
This double-acting cylinder features a 1/8" air port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. Its theoretical maximum force is 50 kgf at 1.0 MPa.
No, the needle-set air cushion only decelerates the piston near the end of its stroke; it is not a brake. For vertical load holding during air loss, you must install an external rod lock or pilot-operated check valve. The built-in -S magnet supports CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X190SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.