Airtac MIC Cushioned Mini Cylinder MIC25X215SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X215SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 215mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke215 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X215SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles mid-range automation tasks with precision. The Ø25 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. A built-in piston magnet (-S) supports CMSG, DMSG, or EMSG switches for position sensing, while the rear CA pivot cover simplifies clevis mounting.
Tuned via a needle valve at both ends, the variable air cushion absorbs high-speed end-of-stroke shock to protect your payload and reduce noise. The stainless barrel and rod resist mild corrosion and washdown environments. Based on the 0.5 MPa push rating, it handles a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread match standard pneumatic schematics.
Airtac MIC Cushioned Mini Cylinder MIC25X215SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X215SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 215 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X215SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X215SCA Is Used
Pivot-Driven Assembly Press
Uses the CA rear clevis to articulate a 12 kg component into a fixture, relying on the adjustable cushion to prevent slamming at 215 mm stroke completion.
High-Speed Diverter Gate
Swings a routing flap at high cycle rates where the needle-set air cushion absorbs the 245 N end-of-stroke shock, protecting the gate mechanism from wear.
Washdown Carton Sealer
Deploys the stainless steel rod and barrel in damp packaging lines, pushing sealing heads with a safe 147 N working load while resisting mild corrosion.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X215SCA the Right Cylinder?
When sizing this 215 mm stroke unit, step down to the MIC20 (157 N push @0.5 MPa) for lighter loads, or move up to the MIC32 (402 N push @0.5 MPa) if you need more thrust. The adjustable cushion is essential here: at high speeds or when moving the maximum 12.5 kg vertical load, dialing in the end-of-stroke deceleration prevents impact damage that a fixed bumper cannot absorb.
Remember that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops or the valve is centered, the rod will drift. For vertical or suspended loads requiring fail-safe holding, add an external rod lock or a pilot-operated check valve. The -S magnet enables sensor tracking, and the CA rear cover provides a robust pivot point for articulating mechanisms.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X215SCA FAQ
This double-acting cylinder has a 25 mm bore, 215 mm stroke, 1/8" port, and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. The variable air cushion only decelerates the piston near stroke end to reduce shock; it is not a brake. The cylinder will drift on air loss, so use an external rod lock or pilot check valve for vertical load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X215SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.