Airtac MIC Cushioned Mini Cylinder MIC25X250CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X250CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke250 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X250CA
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X250CA is a double-acting, round-body stainless-steel mini cylinder built for a 250 mm stroke. A variable air cushion at both ends lets you dial in the deceleration needle to absorb high-speed end-of-stroke shock, protecting your payload while cutting noise. The stainless barrel and rod resist mild corrosion and washdown environments.
This Ø25 bore unit uses a 1/8" port and an M10x1.25 male rod thread. It conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets. With a safe working load around 147 N, it can vertically lift about 12.5 kg with a 2:1 safety margin. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; specify the -S variant if you require position sensing.
Airtac MIC Cushioned Mini Cylinder MIC25X250CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X250CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 250 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X250CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X250CA Is Used
High-Speed Carton Diversion
Uses the 245.3 N push force to deflect light packaging on a fast belt, while the adjustable cushion prevents harsh end-of-stroke impacts.
Pneumatic Parts Ejector
Ejects machined components at speed, relying on the needle-set air cushion to bring the rod to a smooth, quiet stop.
Vertical Gate Actuator
Lifts a 12.5 kg access gate with a 2:1 margin, using the CA pivot mount to accommodate the swing geometry.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X250CA the Right Cylinder?
When sizing this 25 mm bore, stepping down to the MIC20 drops the 0.5 MPa push force to 157 N, while stepping up to the MIC32 raises it to 402 N. Choose this 245 N class when moving moderate masses, and rely on the adjustable air cushion specifically when operating at high speeds or slamming heavy loads. The CA rear pivot cover suits articulated rod-end connections.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If your application must hold a load vertically during air loss, add an external rod lock or a pilot-operated check valve. Furthermore, because this base SKU has no magnet, it cannot support magnetic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X250CA FAQ
This double-acting cylinder has a 25 mm bore, a 250 mm stroke, and a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU lacks a magnet and cannot accept CMSG, DMSG, or EMSG switches; you need the -S variant for sensing. The adjustable air cushion only decelerates the piston near stroke end to reduce shock, but it does not lock or hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X250CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.