Airtac MIC Cushioned Mini Cylinder MIC25X25CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X25CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X25CA
Designed for rapid 25 mm strokes, the AirTAC MIC25X25CA is a double-acting round-body mini cylinder built from stainless steel for mild washdown resistance. A needle-set variable air cushion at both ends absorbs high-speed end-of-travel impact, protecting your payload far better than a fixed bumper. The rear CA pivot cover simplifies clevis mounting, while the 1/8" port keeps airflow compact.
Delivering 245.3 N of push force at 0.5 MPa, this ISO 6432 unit handles a safe working load of roughly 147 N. That translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Note this specific SKU lacks a magnet, so it cannot accept CMSG or DMSG position switches without upgrading to the -S variant.
Airtac MIC Cushioned Mini Cylinder MIC25X25CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X25CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X25CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X25CA Is Used
Short-Stroke Clamping
Ideal for gripping components on an automated line, using the 245 N thrust to hold parts firmly during machining without end-of-stroke shock.
Package Diverting
Executes rapid 25 mm diverting strokes on packaging conveyors where the needle-set air cushion silently absorbs the high-speed impact of repeated cycling.
Pallet Stop Gates
Functions as a compact pallet stop gate, using its stainless construction to withstand mildly humid warehouse environments while halting 12 kg loads smoothly.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X25CA the Right Cylinder?
When sizing this 25 mm bore, dropping down to the MIC20X50 yields 157 N of push at 0.5 MPa, whereas stepping up to the MIC32 provides 402 N if your payload exceeds 147 N. The adjustable cushion matters most when cycling at high speeds or moving heavy masses, as it prevents harsh mechanical banging. Keep in mind the cushion only decelerates the load near the stroke end; it will not hold position on air loss. For vertical or suspended loads that must not drift, add an external rod lock or pilot check valve. Mount this CA-cover model via a rear clevis, and choose the -S magnet version if you need sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X25CA FAQ
This double-acting cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select the -S magnet variant for sensing. The adjustable air cushion at both ends only decelerates the load near the stroke end and does not act as a brake or lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X25CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.