Airtac MIC Cushioned Mini Cylinder MIC25X25SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X25SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X25SCA
Dial in end-of-stroke deceleration with the AirTAC MIC25X25SCA, a double-acting round-body mini cylinder built around a stainless-steel barrel and Ø10 mm piston rod. Instead of a fixed bumper, it uses a needle-set variable air cushion at both ends to absorb high-speed shock, protecting your payload while dropping noise. The built-in -S piston magnet enables position sensing with CMSG, DMSG or EMSG switches, and the CA rear cover provides a robust pivot/clevis mount.
Operating at 0.15-1.0 MPa on a 1/8" port, this Ø25 bore generates 245.3 N of push force and 206.1 N of pull force at 0.5 MPa. In practical terms, that yields a safe working load of roughly 147 N, letting you lift about 12.5 kg vertically with a 2:1 safety margin. It conforms to ISO 6432 mounting dimensions for standard mini-cylinder brackets, hitting a sweet spot between compact size and meaningful thrust.
Airtac MIC Cushioned Mini Cylinder MIC25X25SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X25SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X25SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X25SCA Is Used
Package Diverting
Handles the 12.5 kg vertical lift margin needed to pivot light parcels off a high-speed belt, using the needle cushion to stop the 25 mm stroke without slamming.
Small Press Ejection
Pushes stamped parts out of a die with 245.3 N of force at 0.5 MPa, relying on the adjustable end cushions to decelerate the rapid ejection stroke quietly.
Flap Folding
Drives carton flaps at speed on a washdown line where the stainless steel rod resists mild corrosion and the CA pivot mount accommodates the angular motion.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X25SCA the Right Cylinder?
If 245.3 N of push at 0.5 MPa is too much, step down to the Ø20 bore which provides 157.0 N; if you need more muscle, the Ø32 bore jumps to 402.2 N. The adjustable air cushion on this model is essential when cycling at high speeds (up to 800 mm/s) or moving heavier masses, as it prevents harsh end-impact. Keep in mind the cushion only decelerates the piston near the stroke end—it is not a brake. Because a standard cylinder will drift and lose its load on air loss, add an external rod lock or pilot check valve if you need strict position holding.
This SKU includes the -S magnet for CMSG/DMSG/EMSG sensors and features a CA clevis back cover. You can adapt the mounting using LB foot brackets, FA flanges, SDB pivot blocks, or TC trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X25SCA FAQ
This Ø25 mm cylinder has a 1/8" air port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No. The adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it does not act as a lock or brake. If air loss occurs, the piston will drift. To hold a load securely, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X25SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.