Airtac MIC Cushioned Mini Cylinder MIC25X30CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X30CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X30CM
Engineered for rapid cycling, the AirTAC MIC25X30CM utilizes a needle-set variable air cushion at both ends to absorb end-of-stroke shock, outperforming fixed bumper designs at high speeds. This double-acting, round-body stainless steel mini cylinder provides a robust 245.3 N push force at 0.5 MPa, yielding a safe working load of roughly 147 N or a 12.5 kg vertical lift with a 2:1 margin.
Conforming to the ISO 6432 mounting interface, it drops directly into standard mini brackets and clevises. The unit features a 25 mm bore, a 10 mm piston rod with an M10x1.25 male thread, a 1/8" port, and a CM round rear cover for straightforward port orientation. Note that this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors; order the -S variant if position detection is required.
Airtac MIC Cushioned Mini Cylinder MIC25X30CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X30CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X30CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X30CM Is Used
Package Diverting
Ideal for rapidly pushing lightweight parcels off a conveyor belt, using the adjustable cushion to halt the 12.5 kg payload smoothly without jarring the mechanism.
Small Part Ejection
Ejects molded or machined components from a fixture at high cycle rates, relying on the stainless build to resist mild coolant spray and shop contamination.
Lightweight Lift Gates
Drives short-stroke sorting flaps or gates, where the 245.3 N thrust easily overcomes friction and the needle-set cushion prevents end-cap banging.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X30CM the Right Cylinder?
When sizing this 25 mm bore, dropping down to the MIC20 reduces the 0.5 MPa push force to 157 N, while stepping up to the non-ISO MIC32 raises it to 402 N. Select this model when moving loads at high speeds where the adjustable cushion can be finely tuned to decelerate the payload smoothly without metal-on-metal slamming.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If your application must hold a load vertically during a loss of air pressure, integrate an external rod lock or a pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X30CM FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it generates 245.3 N of push force and 206.1 N of pull force. At 0.7 MPa the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so it cannot accommodate CMSG, DMSG, or EMSG switches. You must purchase the -S variant of the MIC25 to enable magnetic sensing. The adjustable air cushion and stainless steel barrel are still present on this non-magnet model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X30CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.