Airtac MIC Cushioned Mini Cylinder MIC25X35SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X35SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 35mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X35SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder brings adjustable air cushioning to high-speed automation. The needle-set cushion at both ends absorbs end-of-stroke shock, protecting your payload while cutting noise. Its stainless barrel and rod shrug off mild corrosion and washdown environments.
Conforming to the ISO 6432 mounting interface for Ø25 bores, it drops directly into standard mini-cylinder brackets and clevises. The CA rear pivot cover adds flexible mounting orientation. With a 1/8" port and an M10x1.25 male rod thread, it provides a safe working load of about 147 N. Factoring a 2:1 margin, it lifts roughly 12.5 kg vertically. The -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG position sensing.
Airtac MIC Cushioned Mini Cylinder MIC25X35SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X35SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 35 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X35SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X35SCA Is Used
High-Speed Diverting
Uses the 245.3 N thrust to push light parcels off a belt at 800 mm/s while the adjustable cushion prevents end-stop shock.
Flap Folding
Ideal for carton sealing where the 12.5 kg vertical lift margin handles lid weight and the ISO 6432 body fits tight spaces.
Component Seating
Presses small bearings into housings; the needle-set cushion ensures parts seat firmly without bouncing or impact damage.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X35SCA the Right Cylinder?
When sizing this 25 mm bore, step down to the MIC20 (157 N push @0.5 MPa) for lighter loads, or step up to the MIC32 (402 N push @0.5 MPa) if you need more thrust. The adjustable air cushion shines at high cycling speeds between 30-800 mm/s, where a fixed bumper would transmit damaging shock. The cushion only decelerates the piston near stroke end; it does not lock the rod. If your application must hold a load vertically during air loss, add an external rod lock or pilot check valve. The CA back cover supplies a rear pivot point, and the included -S magnet supports CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X35SCA FAQ
This double-acting cylinder uses a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, the air cushion only decelerates the piston near stroke end; it is not a brake. The piston will drift on air loss, so use an external rod lock to hold loads. The -S indicates a built-in magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X35SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.