Airtac MIC Cushioned Mini Cylinder MIC25X450CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X450CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke450 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X450CA
Handling mid-range automation tasks, the AirTAC MIC25X450CA brings adjustable air cushioning to a 25 mm bore, 450 mm stroke round-body stainless steel mini cylinder. The needle-set cushion at both ends absorbs high-speed end-of-travel shock, protecting your payload while reducing noise. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The rear CA clevis cover simplifies pivot mounting, and the 1/8" port feeds the double-acting piston.
At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N, scaling to 343.4 N and 288.5 N at 0.7 MPa. That translates to a safe working load of roughly 147 N, meaning it lifts about 12.5 kg vertically with a 2:1 margin. The stainless barrel and rod resist mild washdown corrosion. It conforms to ISO 6432 mounting dimensions, and the male M10x1.25 rod thread handles secure load attachment.
Airtac MIC Cushioned Mini Cylinder MIC25X450CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X450CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 450 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X450CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X450CA Is Used
High-Speed Diverter
Uses the 245.3 N push force to knock parcels off a belt, relying on the adjustable cushion to stop the 450 mm stroke smoothly without slamming.
Carton Flap Folder
Swings heavy cardboard flaps via the CA pivot mount, where the needle-set end cushioning prevents tearing the material at high cycle rates.
Vertical Lift Gate
Raises a 12 kg access panel using the 0.5 MPa thrust, with the stainless build surviving mildly humid dock environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X450CA the Right Cylinder?
Stepping down, the MIC20X50 class offers 157 N push at 0.5 MPa, while the larger MIC32X75S jumps to 402 N if you need more force. The variable cushion matters most when driving a heavy load at high speed across the 450 mm stroke. This cylinder does not hold position on air loss; the piston drifts, so add an external rod lock or pilot check valve for suspended loads. Without the -S suffix, this specific unit cannot mount magnetic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X450CA FAQ
This 25 mm bore cylinder uses a 1/8" port. It pushes at 245.3 N and pulls at 206.1 N at 0.5 MPa. At 0.7 MPa, push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU lacks a magnet. You must choose an -S variant to mount CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the load near stroke end; it is not a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X450CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.