Airtac MIC Cushioned Mini Cylinder MIC25X50SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X50SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X50SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for demanding compact automation. The Ø25 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. An adjustable air cushion at both ends lets you dial in the needle valve to decelerate heavy loads at high speeds, actively reducing end-of-stroke shock and noise compared to fixed bumper designs. The stainless barrel and rod resist mild corrosion and washdown environments.
Equipped with a CA rear pivot cover and a 50 mm stroke, it uses a 1/8" port and an M10x1.25 male rod thread. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG position switches. Based on its 0.5 MPa push rating, it handles a safe working load of roughly 147 N, meaning it lifts about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X50SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X50SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X50SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X50SCA Is Used
High-Speed Diverters
Uses the adjustable air cushion to smoothly arrest the 245 N push force when kicking light packages at high cycle rates, preventing impact damage to the diverter arm.
Carton Flap Folding
The 50 mm stroke drives folding arms rapidly; the end-of-stroke cushioning ensures the mechanism does not slam, protecting seals and maintaining precise flap placement.
Vertical Lift Gates
Lifts roughly 12.5 kg vertically using a 2:1 margin, while the CA pivot mount accommodates the geometry shifts of small access gates on storage enclosures.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X50SCA the Right Cylinder?
When sizing this 245.3 N push unit, consider stepping down to the MIC20 (157.0 N push @0.5 MPa) for lighter duties, or up to the MIC32 (402.2 N push @0.5 MPa) if your payload demands more thrust. The adjustable air cushion is essential if you are cycling near the 800 mm/s upper speed limit or moving substantial mass, as it prevents harsh impacts. For mounting flexibility, you can utilize the CA rear clevis alongside LB foot, FA flange, SDB pivot, or TC trunnion brackets.
Remember that the air cushion only decelerates the piston near the stroke end; it is not a braking device. If air pressure drops, the cylinder will not hold its load and the piston will drift. To maintain vertical position during air loss, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X50SCA FAQ
This Ø25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet compatible with CMSG, DMSG, and EMSG switches. The adjustable air cushion at both ends only decelerates the piston near stroke end to reduce shock; it is not a lock or brake, so you need a pilot check valve or external rod lock to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X50SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.