Airtac MIC Cushioned Mini Cylinder MIC25X80CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X80CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X80CA
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X80CA is a double-acting, round-body stainless steel mini cylinder built for demanding motion control. The stainless barrel and rod resist mild corrosion, making it suitable for washdown environments. A needle-set adjustable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting the load and reducing noise. This 80 mm stroke unit uses a 1/8" port and an M10x1.25 male rod thread.
With a 25 mm bore, it conforms to the ISO 6432 mounting interface, dropping easily into standard mini-cylinder brackets. The rear CA pivot cover simplifies clevis mounting. This non-magnet SKU cannot accept a position sensor; adding the -S option enables CMSG, DMSG, or EMSG switches. Based on the 0.5 MPa push rating, it handles a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC25X80CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X80CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X80CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X80CA Is Used
Package Diverting
Uses the 245 N thrust to push parcels cleanly off a high-speed belt, relying on the adjustable air cushion to prevent harsh slamming at the end of the 80 mm stroke.
Flap Folding
Drives carton flaps into position rapidly; the stainless build handles dusty or mildly humid packing areas without seizing.
Light Pressing
Applies a steady 147 N safe working load to seat small bearings or pins, with the CA pivot bracket accommodating slight misalignment.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X80CA the Right Cylinder?
When sizing this 25 mm bore unit, stepping down to the MIC20 drops the 0.5 MPa push force to 157 N, while moving up to the MIC32 raises it to 402 N. The adjustable air cushion is essential if you operate near the 800 mm/s maximum speed or move heavy masses, as it decelerates the piston smoothly. Remember that the cushion only reduces shock near the stroke end; it is not a brake. Because a standard cylinder drifts when air pressure drops, you must add an external rod lock or pilot check valve to hold a load safely.
The CA rear pivot cover requires a matching clevis bracket for articulation. Since this specific SKU lacks a magnet, it cannot support CMSG, DMSG, or EMSG sensors. If your application requires end-of-stroke detection, select the -S magnet variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X80CA FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 245.3 N push and 206.1 N pull force. At 0.7 MPa it delivers 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for sensing capabilities. The adjustable air cushion at both ends functions only to decelerate the piston near stroke end, not to lock or hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X80CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.