Airtac MIC Cushioned Mini Cylinder MIC32X100U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X100U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X100U
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles within a compact footprint. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. Equipped with a U-style rear cover for 90-degree mounting, it features a 1/8" port and an M10x1.25 male rod thread.
The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the deceleration to absorb high-speed end-of-stroke shock, protecting the load and reducing noise far better than a fixed bumper. For sizing, a safe working load is approximately 241 N (about 60% of the 0.5 MPa push force). In a vertical lift with a 2:1 safety margin, it lifts about 20.5 kg. Note this SKU lacks a magnet, so it cannot accept CMSG/DMSG/EMSG sensors without the -S variant.
Airtac MIC Cushioned Mini Cylinder MIC32X100U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X100U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X100U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X100U Is Used
Package Diverting
Pushes medium-weight cartons at high speed onto secondary lines. The adjustable air cushion prevents harsh slamming that could damage packaging.
Light Pressing
Applies up to 402.2 N of push force for seating small bearings or pins. The needle-set deceleration ensures a smooth contact transition.
Vertical Lift Stops
Raises lightweight gates or product trays. With a 2:1 margin it lifts about 20.5 kg vertically, while the U cover provides stable 90-degree pivoting.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X100U the Right Cylinder?
When sizing this 32 mm bore, stepping down to an MIC25X100 yields 245.3 N push at 0.5 MPa, while stepping up to an MIC40X100 provides 628.3 N. Choose this 32 mm model when moving moderate masses at high speeds, as the adjustable air cushion is critical for preventing end-stroke impact. The cushion only decelerates the piston near the end of travel; it does not function as a brake. If the application requires the load to be held in place upon air loss, install an external rod lock or a pilot-operated check valve. This non-magnetic SKU cannot host position sensors; select the -S magnet version to enable CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X100U FAQ
This 32 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N push and 345.6 N pull force. At 0.7 MPa it delivers 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for sensing capabilities. The adjustable air cushion at both ends only decelerates the load near stroke end and does not lock or hold the position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X100U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.