Airtac MIC Cushioned Mini Cylinder MIC32X10SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X10SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X10SU
Soak up high-speed end-of-stroke shock with the AirTAC MIC32X10SU, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. This 32mm bore unit skips the ISO 6432 interface, offering a larger 1/8" port and a sturdy 12mm rod to handle heavier forces. A needle-set variable air cushion at both ends replaces fixed bumpers to actively decelerate the load, protecting your machinery and reducing noise.
Delivering 402.2N of push force at 0.5MPa, this actuator provides a safe working load of roughly 241N and lifts about 20.5kg vertically with a 2:1 margin. The 10mm stroke moves quickly, and the included -S piston magnet supports CMSG, DMSG, or EMSG sensors for position detection. The U back cover provides a 90-degree mounting orientation for tight layouts.
Airtac MIC Cushioned Mini Cylinder MIC32X10SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X10SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X10SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X10SU Is Used
Short-Stroke Clamping
Use the 10mm stroke to secure heavy metal components during machining, relying on the 402.2N push force to hold parts firmly against a stop.
High-Speed Diverting
Rapidly deflect heavier packages on a packaging line; the dual adjustable air cushions absorb the abrupt stops to prevent mechanical shock.
Vertical Pressing
Apply downward pressure for light assembly tasks or seating bearings, safely lifting around 20.5kg with a 2:1 safety margin.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X10SU the Right Cylinder?
When sizing this 32mm bore, dropping down to the MIC25X50 reduces your push force to 245.3N at 0.5MPa, while stepping up to the MIC40X50 increases it to 628.3N. Choose this larger 32mm round-body unit when moving heavier masses at high speeds where the adjustable needle cushions are essential to prevent impact damage. Keep in mind the cushion only decelerates near the stroke end; it will not hold a load if air pressure drops. For vertical or suspended loads that must resist drifting, add an external rod lock or a pilot-operated check valve. The built-in -S magnet allows seamless sensor integration, and you can mount it via foot, flange, or trunnion hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X10SU FAQ
This double-acting 32mm bore cylinder uses a 1/8" port and a 12mm rod. It generates 402.2N push and 345.6N pull at 0.5MPa, 563N push and 483.8N pull at 0.7MPa, with a theoretical maximum of 82kgf at 1.0MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushions only decelerate the piston near stroke end to reduce shock; they do not act as a brake or lock, so you need a pilot check valve to hold suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X10SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.