Airtac MIC Cushioned Mini Cylinder MIC32X213SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X213SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 213mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke213 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X213SCM
Tame high-speed end-of-stroke impact with the AirTAC MIC32X213SCM, a 32 mm bore round-body mini cylinder engineered for double-acting service. A needle-set variable air cushion at both ends soaks up kinetic energy to protect your payload, a major upgrade over fixed bumper designs. The stainless-steel barrel and piston rod supply mild corrosion resistance for washdown or humid settings, while the 1/8" port feeds a robust force class: 402.2 N push and 345.6 N pull at 0.5 MPa.
This non-ISO-6432 32 mm unit carries a 213 mm stroke and a CM round rear cover for straightforward port orientation. Because the -S suffix denotes a built-in piston magnet, the cylinder is ready for CMSG, DMSG or EMSG position switches. In practical terms it provides a safe working load of roughly 241 N, meaning it lifts about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X213SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X213SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 213 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X213SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×213 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X213SCM Is Used
Package Diverting
Handles 20 kg cartons at high speed on sorting lines, relying on the adjustable air cushion to soften end-of-stroke impact without bouncing the load.
Light Press Fit
Applies up to 402.2 N of push force at 0.5 MPa to seat small bearings, using the needle-set cushion to prevent harsh mechanical slamming.
Vertical Lift Gates
Raises access flaps on storage cabinets, safely lifting around 20.5 kg while the stainless build resists ambient warehouse humidity.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X213SCM the Right Cylinder?
If you need less force, the smaller Ø25 bore supplies 245.3 N push at 0.5 MPa, whereas stepping up to the Ø40 bore yields 628.3 N. Choose this Ø32 variant when moving heavier masses at high cycling speeds where the adjustable cushion becomes essential for smooth deceleration. Remember that the cushion only slows the piston near stroke end and does not act as a brake; if you must prevent drift on air loss, fit an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion brackets, and the included magnet supports reed or electronic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X213SCM FAQ
This double-acting 32 mm bore cylinder uses a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, the piston will drift on air loss. The adjustable air cushion only decelerates the piston near the stroke end and is not a locking brake. For suspended or vertical loads, you must install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X213SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.