Airtac MIC Cushioned Mini Cylinder MIC32X600SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X600SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X600SCM
Designed for heavy-duty mini actuation, this double-acting round-body mini cylinder features a 32 mm bore and an extended 600 mm stroke. Because 600 mm exceeds the 500 mm standard maximum for this bore size, this specific SKU is manufactured as a non-standard, made-to-order unit. The stainless-steel barrel and piston rod provide reliable mild corrosion and washdown resistance. A built-in piston magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches, while the CM round rear cover dictates the port and mounting orientation.
The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the deceleration to absorb end-of-stroke shock at high cycling speeds, protecting the load and reducing noise far better than a fixed bumper. Operating at 0.5 MPa, it delivers 402.2 N of push force and 345.6 N of pull force. For practical sizing, this translates to a safe working load of roughly 241 N, or the ability to lift about 20.5 kg vertically with a 2:1 safety margin. Air connections use a 1/8" port.
Airtac MIC Cushioned Mini Cylinder MIC32X600SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X600SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X600SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X600SCM Is Used
Long-Reach Diverting
Uses the 600 mm stroke to push heavy cartons across a transfer lane, relying on the tuned air cushion to stop the 402.2 N push force smoothly without slamming.
Vertical Flap Folding
Lifts and folds packaging flaps on a washdown line, where the stainless build resists moisture and the 20.5 kg vertical lift capacity handles rigid board materials.
Heavy Component Ejection
Ejects dense machined parts from a press at high speed, using the adjustable end cushions to decelerate the 12 mm rod and prevent impact damage over the extended stroke.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X600SCM the Right Cylinder?
When sizing this 32 mm bore actuator, compare it directly against adjacent bores. If your application requires less force, the 25 mm MIC bore provides 245.3 N of push at 0.5 MPa; if you need substantially more power, stepping up to the 40 mm bore yields 628.3 N. The adjustable air cushion is essential here: for a 600 mm stroke moving heavy masses at speeds up to 800 mm/s, dialing in the end-of-stroke deceleration prevents mechanical damage. Note that the cushion only slows the piston near the end of travel; it does not function as a brake. If the air supply drops or the valve is centered, the piston will drift, so fit an external rod lock or pilot-operated check valve to hold a suspended load safely. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X600SCM FAQ
This 32 mm bore cylinder uses a 1/8" air port and a 12 mm rod with an M10x1.25 male thread. At 0.5 MPa it generates 402.2 N of push force and 345.6 N of pull force. At 0.7 MPa the push increases to 563 N and the pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end to reduce shock; it is not a brake or lock. If air pressure drops, the piston will drift. To hold a load vertically, you must install an external rod lock or a pilot-operated check valve. The -S magnet allows CMSG/DMSG/EMSG sensors to confirm position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X600SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.