Airtac MIC Cushioned Mini Cylinder MIC32X75U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X75U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X75U
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier motion tasks. The stainless-steel barrel and Ø12 mm rod shrug off mild corrosion and washdown environments. A 1/8" port feeds the chamber, while the male M10x1.25 rod thread secures your tooling.
Twin adjustable air cushions replace fixed bumpers, letting you dial in end-of-stroke deceleration to protect payloads at high speed. With a safe working load near 241 N, it lifts about 20.5 kg vertically under a 2:1 safety margin. This U-cover version features a 90-degree rear port and mounting interface. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG switches without the -S option.
Airtac MIC Cushioned Mini Cylinder MIC32X75U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X75U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X75U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X75U Is Used
Package Diverting
Pushes heavy cartons at high speed across transfer belts, using the adjustable cushion to stop the 402 N stroke smoothly without jarring the mechanism.
Pallet Stops
Halts loaded pallets on roller conveyors; the stainless build resists damp dock environments while the cushion absorbs the repeated shock impact.
Flap Folding
Drives folding arms on case sealers where the 241 N safe working load easily overcomes cardboard resistance and the U cover eases port routing.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X75U the Right Cylinder?
For lighter duty, the Ø25 bore supplies 245.3 N push at 0.5 MPa, whereas the larger Ø40 jumps to 628.3 N if you need extra thrust. Choose this Ø32 model when moving substantial mass at high speeds where the adjustable needle cushions absorb kinetic energy. The cushion only decelerates the piston near stroke end; it will not hold a load. To prevent drift on air loss, fit an external rod lock or pilot check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X75U FAQ
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a 1/8" air port and a Ø12 mm rod with an M10x1.25 male thread.
No. This specific SKU is built without a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must select the -S magnet variant for sensing. The adjustable air cushion at both ends only decelerates the load; it does not brake or hold position on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X75U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.