Airtac F-M-U Rod End Joint Assembly Kit F-M18X150U
AirTAC F-M-U Series Rod Eye Joint Assembly F-M18X150U Technical Details
- Full model designation: F-M18X150U
- Joint type: Female threaded rod end bearing with male rod
- Thread specification: M18×1.5 metric external thread
- Rod diameter: Ø8mm precision ground shaft
- Total length: 150mm (threaded portion: 35mm)
- Eye inner diameter: Ø10mm +0.015/-0mm tolerance
- Max swing angle: ±25° omni-directional articulation
- Load capacity: Static 1,500N / Dynamic 800N
- Material:
- Body: 6061-T6 aluminum alloy
- Bearing: Oil-impregnated sintered bronze
- Rod: Case-hardened steel (HRC 58-62)
- Surface treatment: Black anodized (8-12μm) with anti-galling coating
- Operating temperature: -30℃ to +120℃ continuous
- Weight: 328g ±5g (with anti-corrosion grease)
- Dimensions:
- Eye block: 30mm(W) × 42mm(H)
- Rod protrusion: 115mm from eye center
- Hex flats: 22mm spanner size
Precision-aligned rod end joint featuring maintenance-free operation through its self-lubricating bearing insert. The cold-forged eye structure provides 20% higher fatigue resistance compared to standard machined versions. Includes pre-applied thread locker on male threads and a UV-resistant rubber dust cap (EPDM material).
- Pneumatic cylinder linkage in automated assembly lines
- Actuator connections for robotic material handling systems
- Vibration damping in packaging machinery transfer units
- Adjustable support arms for semiconductor fab equipment
- Linkage systems in automotive brake testing rigs
Installation protocol:
Torque to 28-32N·m using flank contact wrench. Perform alignment check
after 50 operating cycles. Relubricate bearing after 100,000 cycles
using MIL-PRF-23827 grease. Avoid axial sideload exceeding 15% of rated capacity.
| Property | Property Value |
|---|---|
| sku | F-M18X150U |
| Thread Pitch | 1.5mm |
| Thread Specification | M18 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.