AirTAC Pneumatics
AirTAC Sensor Mounts, Straps & Cables
80 AirTAC parts that hold a magnetic switch onto the cylinder - brackets, straps and D-sub cables for SC, SI, HGS, MQ and TSAI, in size tokens 6 to 250.
inventory_280 models availableSeries Overview
This collection is the sensor-side hardware for AirTAC cylinders: 80 parts that hold a magnetic switch against the barrel and connect it. The line-up splits into fixing hardware and cabling - 18 F-SC brackets for SC, 14 F-HGS sensor mounts, 11 F-MQS and 10 F-MQA mounting straps, 9 F-SI brackets for SI and 3 F-TSAI brackets for TSAI, plus 15 F-DSUB cable variants. Brackets and straps sit in the few-dollar range (median $5.08); the cables carry the expensive end at up to $60.45.
One warning before you order, because this is the collection most often confused with another of ours: F-SC on this page is a sensor mounting bracket; F-SC-LB on our /mounting-brackets collection is an axial fixing bracket that holds the cylinder body to the machine. The codes look near-identical but the parts are not interchangeable in function. Mounting the cylinder? Go to /mounting-brackets. Mounting the switch? You are in the right place.
Three fixing methods run across the range. Brackets bolt to the cylinder (F-SC, F-SI, F-TSAI and their -H variants). Straps clamp around the barrel (F-MQS, F-MQA). F-HGS has its own sensor mount arrangement for HGS. For TSAI we can quote the exact fitment from the guided-cylinder catalogue: bore 32/40 takes F-TSAI32E, bore 50/63 takes F-TSAI50E and bore 80/100 takes F-TSAI80E, all for CMSE and DMSE sensor series - and a magnet-equipped TSAI cylinder ships with two mounting bases. Size tokens across the collection run from 6 to 250, so the same hardware logic covers mini cylinders through large bores.
Browse Models
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC63SH
SKU: F-SC63SH
$4.62$12.12
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC80SH
SKU: F-SC80SH
$4.62$12.12
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC80H
SKU: F-SC80H
$3.68$11.18
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC63H
SKU: F-SC63H
$3.68$11.18
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC32SH
SKU: F-SC32SH
$4.62$12.12
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC32H
SKU: F-SC32H
$3.68$11.18
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC250SH
SKU: F-SC250SH
$6.47$13.97
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC160SH
SKU: F-SC160SH
$5.80$13.30
schedule Confirm lead time
Airtac F-SC-H Sensor Mounting Bracket Assembly F-SC125SH
SKU: F-SC125SH
$5.08$12.58
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI80H
SKU: F-SI80H
$4.15$11.65
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI63H
SKU: F-SI63H
$3.68$11.18
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI50H
SKU: F-SI50H
$3.68$11.18
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI40H
SKU: F-SI40H
$3.68$11.18
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI32H
SKU: F-SI32H
$3.68$11.18
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI200H
SKU: F-SI200H
$5.08$12.58
schedule Confirm lead time
Airtac F-SI-H Sensor Mounting Bracket Complete Kit F-SI160H
SKU: F-SI160H
$5.08$12.58
schedule Confirm lead time
Typical Applications
Packaging machine end-of-stroke sensing
On carton-sealing and wrapping machines, F-SC brackets hold magnetic switches on SC cylinders at the fixed home and extend positions, with the cable run to the PLC input card.
Conveyor stopper and diverter feedback
Pop-up stops and diverters on conveyor lines need a switch that stays put through vibration. The bolt-on F-SC and F-SI brackets lock the switch position; straps let maintenance re-tune the trip point along the barrel.
Assembly station part-present detection
On bench-top clamping and pressing stations built around SI and MQ cylinders, the compact brackets and straps position the switch close to the workpiece where stroke confirmation is critical.
Guided slide positioning on TSAI cylinders
TSAI guided cylinders on pick-and-place slides use the documented fitment: F-TSAI32E, F-TSAI50E or F-TSAI80E brackets for CMSE and DMSE switches, with a second mounting base supplied on magnet-equipped units.
How to Choose the Right Model
Start from the cylinder series the switch is going onto, because the series name is already in the part code: F-SC for SC, F-SI for SI, F-HGS for HGS, F-MQS/F-MQA for MQ and F-TSAI for TSAI. Then pick the fixing method. A bolt-on bracket suits points where the switch must not drift once set. A mounting strap (F-MQS, F-MQA) clamps around the barrel and is the choice when you want to reposition the switch along the stroke without drilling or re-tapping. Match the size token to your bore - tokens run from 6 up to 250.
Before ordering, confirm the 5-point match: (1) your cylinder series and bore size; (2) the fixing method - bracket, strap or F-HGS mount; (3) sensor fitment - only the TSAI rule is documented (bore 32/40 to F-TSAI32E, 50/63 to F-TSAI50E, 80/100 to F-TSAI80E, sensors CMSE and DMSE), so confirm the switch model for other series with us; (4) the cable - choose from the 15 F-DSUB variants and confirm length and connector per part number; (5) the magnet - a magnetic switch needs the magnet option on the piston, and our data does not confirm retrofit to a cylinder ordered without one, so route that question to us. If you actually need to fix the cylinder body to your machine, step out to /mounting-brackets; guided-series holders and carriages live at /guide-frames; the full cylinder-accessories family is /cylinder-accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
The collection holds 80 parts. Size tokens run from 6 to 250, covering mini cylinders through large bores. Prices run from $3.68 to $60.45 with a median of $5.08 - the brackets and straps are a few dollars each, the F-DSUB cables are the expensive end.
Brackets (F-SC, F-SI, F-TSAI and the -H variants) bolt to the cylinder and hold the switch rigidly at a set point. Mounting straps (F-MQS, F-MQA) clamp around the barrel and allow repositioning along the stroke. F-HGS is the dedicated sensor mount for HGS cylinders. Match the method to whether your switch position is fixed or needs periodic adjustment.
No. F-SC on this page is a sensor mounting bracket that holds a magnetic switch onto the cylinder. F-SC-LB is an axial fixing bracket that holds the cylinder body to the machine, sold in our /mounting-brackets collection. The codes look near-identical, so check which part you are holding the cylinder or the switch before ordering.
For TSAI the documented pairing is CMSE and DMSE sensor series, with bore 32/40 to F-TSAI32E, 50/63 to F-TSAI50E and 80/100 to F-TSAI80E. For other series, confirm your switch model with us before ordering. The 15 F-DSUB cable variants are listed simply as Cable - we hold no length, conductor count or connector detail beyond the D-sub name, so confirm the specification per part number. All parts are genuine AirTAC, listed and orderable; lead time on request.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.