Airtac ACED Double-acting Compact Cylinder ACED50X200
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED50X200 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø50mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED50X200
The ACED50X200 is a double acting, double-rod compact cylinder built to ISO 21287: a piston rod exits both covers of the hard-anodized aluminium body, so thrust is identical on the extend and retract strokes. At 0.5 MPa the 50 mm bore delivers 881.2 N in either direction (1233.7 N at 0.7 MPa), because both strokes work on the rod-side area. The 16 mm S45C hard-chrome rod runs through the 200 mm stroke at 30-500 mm/s, with a fixed TPU bumper at each end absorbing end-of-stroke shock.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and gantries. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a symmetric tool. As a rule of thumb, plan on roughly 529 N (about 54 kg) of usable work force at 0.5 MPa, which corresponds to lifting a part of around 45 kg vertically with a 2:1 margin. Air supply is 0.15-1.0 MPa (22-145 psi), filtered to 40 um, from -20 to 70 C.
Airtac ACED Double-acting Compact Cylinder ACED50X200 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED50X200 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED50X200
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED50X200 Is Used
Symmetric fixture clamping
The equal 881.2 N force in both directions lets a machining fixture clamp and release a steel workpiece with identical pressure, so cycle repeatability does not depend on stroke direction.
Counterbalanced press head
With a rod on each end of the 200 mm stroke, a packaging machine can guide a 45 kg press head vertically with a 2:1 margin, the rear rod doubling as a mount for a position flag.
Bidirectional pusher station
On a bottling line transfer conveyor, the through-rod pushes trays off the belt at either end position, with the TPU bumpers softening each stop at speeds up to 500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED50X200 the Right Cylinder?
For lighter duty, the 40 mm bore ACED gives 571.8 N at 0.5 MPa; for heavier work step up to the 63 mm bore at 1458.1 N. This 50 mm model sits between them with 881.2 N both ways. Note that a plain double-rod cylinder will drift if air is lost - add a rod lock or pilot check valve where a load must be held. Mount with FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles on the ISO 21287 face. This code has no magnet; order the -S variant if you need CMSE / DMSE switch detection, and specify G thread if you need BSP ports instead of PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED50X200 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 50 mm bore takes a 1/8" port with a female M10x1.5 rod thread.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with threaded aluminium covers and a fixed TPU bumper at each end of the 200 mm stroke. Position sensing requires the optional -S magnet code - this unit has no magnet fitted, so CMSE or DMSE switches will only work if you order the -S version. FA/FB flange, LB foot and FTC mounts bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED50X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.