Airtac ACED Double-acting Compact Cylinder ACED63X55S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X55S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X55S
The ACED63X55S is a double acting, double-rod ISO 21287 compact cylinder with a 63 mm bore and 55 mm stroke. A 16 mm rod exits both covers, so the rod-side area works on each stroke and the output is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and light side load, and the rear rod end can carry a sensor flag or a second tooling plate. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, with a fixed TPU bumper at each end.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes this bore easy to fit into tight gantries and guarding. At 0.5 MPa the thrust equals roughly 148 kgf, so halving for a 2:1 margin lets it lift about 74 kg vertically; planning around 875 N (about 89 kg) of real work keeps a comfortable reserve. The hard-anodized aluminium body carries the optional -S magnet, fitted on this model, for CMSE / DMSE switches, and the S45C hard-chrome rod thread is female M10x1.5 with a 1/8" PT port.
Airtac ACED Double-acting Compact Cylinder ACED63X55S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X55S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X55S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X55S Is Used
Symmetric weld-fixture clamping
The equal 1458.1 N force on both strokes lets one cylinder clamp from either side of a weld jig, with the rear rod driving a second clamp pad off the same piston.
Pallet lift-and-lower stations
With about 74 kg of vertical lift at a 2:1 margin, the 63 mm double rod raises and lowers pallet trays on assembly lines, the through-rod keeping the platform level.
Position-verified press units
The fitted -S magnet works with CMSE / DMSE switches so a short-stroke forming or marking press confirms both end positions, inside a body about 50% shorter than an ISO 15552 profile cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X55S the Right Cylinder?
At 63 mm bore this model delivers 1458.1 N at 0.5 MPa in both directions; step down to the 50 mm bore (881.2 N) for lighter clamping or up to the 80 mm bore (2356.2 N) for heavier presses. The 55 mm stroke sits well inside the 250 mm maximum standard stroke for this bore. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X55S FAQ
Because a rod exits both covers, both strokes use the rod-side area and the force is identical either way: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
This model carries the optional -S magnet, so CMSE reed or DMSE solid-state switches mount directly in the body slots to signal piston position. Each end of the stroke is decelerated by a fixed TPU bumper; it is not adjustable and does not hold the load, so use a rod lock or pilot check valve where a lost-air position must be kept.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X55S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.