Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S
The ACEJ32X175-100S is a double acting AirTAC compact cylinder built to ISO 21287, with a 32 mm bore and a 175 mm stroke that an external stop screw can trim anywhere in a 100 mm window, giving a usable extend range of 75-175 mm. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit.
For sizing the job, treat roughly 241 N (about 0.6 of the push rating) as the practical working force at 0.5 MPa, and expect about 20 kg of vertical lift capability with a 2:1 margin. The S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for end-of-stroke signalling. FA flanges, LB feet and I / Y rod knuckles bolt straight to the ISO 21287 face.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S Is Used
Multi-product jig clamping
A 75-175 mm adjustable extend range lets one cylinder clamp different fixture widths on a machining cell table, with 402.1 N push at 0.5 MPa holding steel parts firmly.
Packaging line pusher station
The 175 mm stroke pushes cartons across a conveyor lane, and the fitted magnet with CMSE switches confirms extend and retract positions to the PLC without external limit switches.
Small parts press-fit station
About 241 N of practical working force at 0.5 MPa presses bushings into housings on an electronics assembly bench, with the stop screw trimming stroke per product variant.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S the Right Cylinder?
At 32 mm bore this sits mid-range: a 25 mm bore gives 245.4 N push at 0.5 MPa, while a 40 mm bore raises that to 628.3 N, so step up if your tooling needs more than about 240 N of usable force. The 100 mm adjustment window suits stations where one cylinder serves several product widths. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock; on air loss the piston can drift. Order the -S magnet (fitted here) if CMSE / DMSE switch feedback is needed, and pick FA or LB mounting plus a female M8x1.25 rod thread to match the fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S FAQ
This 32 mm bore model pushes 402.1 N and pulls 345.6 N at 0.5 MPa, and pushes 563 N (pull 483.8 N) at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" PT port and a 12 mm rod with female M8x1.25 thread.
The -100 code sets a 100 mm adjustment window: an external stop screw shortens the 175 mm extend stroke on site, so the usable range is 75-175 mm. It is a mechanical end stop only, not a mid-stroke lock, so the rod can drift if air is lost. The fixed TPU bumpers at both ends absorb end-of-stroke energy. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches mount in the body slots; the short ISO 21287 body takes FA flange, LB foot and I / Y knuckle hardware directly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.