Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S
The ACEJ32X175-10S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 175 mm stroke by up to 10 mm on site, giving a usable range of 165-175 mm without changing the cylinder. At 0.5 MPa the 32 mm bore delivers 402.1 N push and 345.6 N pull; at 0.7 MPa that rises to 563 N push. As a working rule, plan on roughly 241 N of real work at 0.5 MPa, and expect about 20 kg of vertical lift with a 2:1 margin (the theoretical ceiling is 82 kgf at 1.0 MPa).
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 175 mm stroke fits jigs, guards and gantries where a full-length body will not. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches mount directly in the body slots. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S Is Used
Fixture clamping with trim
Clamps machined aluminium housings on a CNC fixture; the 10 mm window lets the setter dial the 165-175 mm extend stroke to seat the clamp without re-plumbing.
Packaging push-off arm
Pushes cartons off a conveyor lane into a chute; 402.1 N push at 0.5 MPa clears loaded boxes, and CMSE switches confirm the retracted home position.
Ejector on an assembly press
Ejects finished gear-pump rotors from a nest; the short ISO 21287 body fits under the press bolster where an ISO 15552 profile cylinder would not.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S the Right Cylinder?
For this 175 mm stroke, bore 32 gives 402.1 N push at 0.5 MPa. Step down to bore 25 (245.4 N push) for lighter clamping, or step up to bore 40 (628.3 N push) if the load grows. The stop screw is a mechanical end stop for the extend stroke only, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet lets you add CMSE / DMSE switches for end-position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N; theoretical maximum is 82 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: a stop screw on the cylinder shortens the 175 mm extend stroke by up to 10 mm, so the working range is 165-175 mm. The stop is an end stop only and does not hold a load if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots. It runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um at 30-500 mm/s, with a 1/8" port and female M8x1.25 rod thread; FA flange and LB foot mounts are available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X175-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.