Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S
The ACEJ32X60-50S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 60 mm stroke by up to 50 mm, giving a usable range of 10-60 mm without changing the cylinder. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for end-of-stroke signalling.
The hard-anodized aluminium body with an S45C hard-chrome plated rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the two-way piston seal stores grease for long service. As a rule of thumb, plan on roughly 240 N (about 24 kg) of usable push at 0.5 MPa, which lifts about 20 kg vertically with a 2:1 margin.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S Is Used
Clamp fixture on a CNC milling pallet
The 402.1 N push at 0.5 MPa holds aluminium housings in a drill jig, and the 10-60 mm trim range lets one cylinder serve fixtures of different part heights.
Reject pusher on a packaging line
Short 60 mm body fits under the conveyor frame where an ISO 15552 profile cylinder would not, and the fitted magnet with a DMSE switch confirms each reject stroke.
Eject pin on a small assembly press
About 24 kg of usable push at 0.5 MPa ejects pressed bushings from a die, with the TPU bumper softening each end-of-stroke impact at 30-500 mm/s.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S the Right Cylinder?
Size both ways before ordering: the 25 mm bore delivers 245.4 N push at 0.5 MPa if your load is lighter, while the 40 mm bore gives 628.3 N for heavier clamping. Keep the stop screw set as a mechanical end stop only - on air loss the piston will still drift, so it is not a mid-stroke lock. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face; the female M8x1.25 rod thread suits standard fixture accessories. If you need position sensing, this model already carries the optional -S magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The -50 code is a 50 mm adjustment window: the external stop screw shortens the 60 mm extend stroke by up to 50 mm, so the usable range is 10-60 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod and a fixed TPU bumper at both ends, about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots. Air supply should be filtered to 40 um; port size is 1/8" and the rod end is female M8x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.