Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S
The AirTAC Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S
The ACEJ32X80-40S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 80 mm stroke down by up to 40 mm, giving a usable range of 40-80 mm without changing the cylinder. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, and the fitted -S magnet lets CMSE / DMSE switches report position along the magnet slots in the body.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. Plan on roughly 240 N (about 24 kgf) of real work at 0.5 MPa, which corresponds to lifting about 12 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and speed spans 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S Technical Specifications
| Model | Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S Is Used
Fixture clamping on CNC pallets
The 40-80 mm adjustable stroke lets one cylinder serve different pallet heights, with 402.1 N push holding parts firmly during milling or drilling.
Packaging line product stops
Trim the extend stroke on site to match carton sizes on a conveyor, while the fitted magnet and a CMSE switch confirm the stop is deployed.
Press-fit of small bushings
About 240 N of usable force at 0.5 MPa suits light press-in work on electronics housings and small bearing assemblies, with the compact body fitting inside the press frame.
Is the Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S the Right Cylinder?
At 402.1 N push at 0.5 MPa this 32 mm bore sits between the 25 mm bore (245.4 N) and the 40 mm bore (628.3 N); step up to 40 mm if your load needs more than about 240 N of working force. Remember the stop screw is an end stop only - it sets the extend stroke but does not hold a load if air is lost. FA flange or LB foot mounts bolt to the ISO 21287 face, and the female M8x1.25 rod thread takes standard rod knuckles (I or Y).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S FAQ
It pushes 402.1 N and pulls 345.6 N at 0.5 MPa, and 563 N / 483.8 N at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 80 mm extend stroke by up to 40 mm, so the working range is 40-80 mm. It cannot lengthen the stroke beyond 80 mm, and the stop is not a load-holding brake - the piston drifts if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE or DMSE reed / solid-state switches can be clamped directly into the body slots. Mounting options include FA flange and LB foot, with a 1/8" PT port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ32~40 Adjustable Cushion Compact Cylinder ACEJ32X80-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.