Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S
This is a double acting ISO 21287 compact cylinder with an adjustable extend stroke. The 100 mm bore delivers 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The -30 code means an external stop screw trims the 100 mm extend stroke anywhere in a 30 mm window, so the usable range is 70-100 mm, set on site with a screwdriver rather than a new order. The short ISO 21287 body takes up roughly 50% less mounting length than an ISO 15552 profile cylinder, which is why it slots into heavy presses and gantries where a full-length body will not fit.
Practical sizing: plan on about 2356 N (roughly 240 kg) of real work at 0.5 MPa, and expect it to lift about 200 kg vertically with a 2:1 margin. Construction is a hard-anodized aluminium body with an S45C hard-chrome-plated 20 mm rod, a grease-retaining two-way piston seal and a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped into the body slots for end-of-stroke sensing. Air supply is 0.15-1.0 MPa (22-145 psi), filtered to 40 um, with speeds of 30-500 mm/s.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S Is Used
Clamping fixtures on CNC machining centres
The 3927 N push at 0.5 MPa clamps large castings or weldments in machining fixtures, and the 30 mm adjustment window lets one cylinder serve parts of slightly different heights without re-plumbing.
Short-stroke press and staking stations
With about 240 kg of practical working force and a 70-100 mm stroke range, it suits staking, riveting and light forming heads where floor space rules out a full-length profile cylinder.
Vertical lift-and-lower gantry modules
The theoretical 800.9 kgf class means it can raise roughly 200 kg parts vertically with a 2:1 margin, while the fitted magnet and CMSE switches confirm top and bottom of travel on the HMI.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S the Right Cylinder?
At this force class the ACEJ100X100-30S sits near the top of the range: the next bore down, the 80 mm ACEJ, gives 2513.3 N push at 0.5 MPa, while the 125 mm bore reaches 6135.9 N. If your load needs more than about 240 kg of usable push, step up; if it is under 250 kg, this bore is the economical choice. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock, so on air loss the piston still drifts - add a separate holding valve if the load must stay put. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet lets you add CMSE / DMSE switches wherever position feedback is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa those figures rise to 5497.8 N push and 5277.9 N pull, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -30 code gives a 30 mm adjustment window: an external stop screw shortens the 100 mm extend stroke on site, giving a usable range of 70-100 mm. It shortens the stroke only - it never extends it past 100 mm, and it is a mechanical end stop, not a load-holding brake. Supply air at 0.15-1.0 MPa (22-145 psi), filtered to 40 um, and run speeds of 30-500 mm/s.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards, jigs and gantry frames. A fixed TPU bumper at each end absorbs end-of-stroke impact. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches mount directly in the body slots for position feedback. FA flange and LB foot mountings plus I and Y rod knuckles bolt straight to the standard ISO 21287 face, and the rod ends in a female M12x1.75 thread with a 1/8" PT air port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.