Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75
A double acting ISO 21287 compact cylinder, the ACEJ100X100-75 pairs a 100 mm bore with a 100 mm stroke that an external stop screw trims anywhere in a 75 mm window, so the effective extend range is 25-100 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body carries magnet slots, and the S45C rod is hard-chrome plated for long seal life.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 100 mm bore press or clamp must fit inside a guarded frame. As a rule of thumb, plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa, and expect it to lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, speed runs 30-500 mm/s, and the rod ends in a female M12x1.75 thread with a 1/8" PT port.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 Is Used
Pneumatic press for aluminum extrusion crimping
The 3927 N push at 0.5 MPa crimps terminal blocks and small extrusion joints, and the 25-100 mm adjustable range lets one fixture handle varying part heights.
Pallet-stacking lift module in a packaging line
With about 200 kg of vertical lift capacity at a 2:1 margin, the cylinder raises carton stacks between conveyor levels inside a compact guarded frame.
Clamping fixture on a CNC machining center
LB foot mounting and the short ISO 21287 body let the clamp sit beside the vice, holding cast housings with up to roughly 240 kg of usable force at 0.5 MPa.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 the Right Cylinder?
At this bore size the step either way is large: a 63 mm bore delivers 1558.6 N push at 0.5 MPa, while a 125 mm bore reaches 6135.9 N, so pick the 100 mm when your load sits between roughly 1500 N and 4000 N. Remember the stop screw only shortens the extend stroke within the ordered 75 mm window and drifts on air loss, so it is not a mid-stroke lock. FA flange or LB foot mounting bolts to the ISO 21287 face, and if you need position feedback, order the -S code so CMSE / DMSE switches can be fitted; this model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N. At 0.7 MPa the figures are 5497.8 N push and 5277.9 N pull, and the theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), running on air filtered to 40 um at 30-500 mm/s.
An external stop screw shortens the 100 mm extend stroke by up to 75 mm, giving a usable range of 25-100 mm; it is a mechanical end stop, not a load-holding lock, so the rod still drifts if air is lost. This model has no magnet, but ordering the optional -S code enables CMSE / DMSE switches on the body slots. Mounting is FA flange or LB foot on the ISO 21287 face, and the fixed TPU bumpers absorb end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X100-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.