Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10
The ACEJ100X110-10 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 110 mm stroke by up to 10 mm on site, giving a usable range of 100-110 mm without changing hardware. At the 100 mm bore this is a heavy-duty class unit - 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N at 0.7 MPa - so it can clamp, press or lift loads that smaller bores cannot touch.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 100 mm bore has to fit inside a press frame or machine guard. For sizing, treat roughly 0.6 of the push force as usable work at 0.5 MPa, about 2356 N, which is roughly 240 kg of vertical lift with a 2:1 margin. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches - this model has no magnet fitted.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 Is Used
Press-frame clamping
The 3927 N push at 0.5 MPa holds steel workpieces in welding and machining fixtures, and the 100-110 mm adjustable range lets the stroke be trimmed to the fixture depth.
Heavy pallet lift stations
With about 240 kg of vertical lift at a 2:1 margin, the 100 mm bore raises loaded pallets or dies in assembly lines where the compact body must fit under a table.
Gate and door actuation
A 110 mm stroke with 10 mm of on-site trim suits heavy sliding guards and gates on packaging machinery, with the FA flange mounting directly to the frame.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 the Right Cylinder?
Size against neighbours: the 80 mm bore gives 2513.3 N push at 0.5 MPa, while stepping up to 125 mm raises it to 6135.9 N - the 100 mm bore at 3927 N sits squarely between them for heavy clamping and lifting. The -10 stop screw only shortens the extend stroke within the ordered window; it is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Mounting: FA flange or LB foot bolt to the ISO 21287 face, with I/Y rod knuckles available. If position feedback is needed, order the -S code for the magnet - CMSE / DMSE switches only work with it.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N; theoretical maximum is 800.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site to any setting from 100 to 110 mm. It is a mechanical end stop only - it does not hold a load if air pressure is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 100 mm bore fits where a full-length profile cylinder will not. The hard-anodized aluminium body has a 20 mm hard-chrome-plated S45C rod, a female M12x1.75 rod thread, a 1/8" PT port, and fixed TPU bumpers at both ends. Sensors are possible only with the optional -S magnet code, which allows CMSE / DMSE switches - this model, ordered without -S, carries no magnet. Mounting options include FA flange and LB foot.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.