Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S
The ACEJ100X110-10S is a double acting AirTAC compact cylinder built to ISO 21287, with a 100 mm bore and a 110 mm stroke that an external stop screw can trim by up to 10 mm, giving a usable extend range of 100-110 mm. At 0.5 MPa it pushes with 3927 N and pulls with 3769.9 N, rising to 5497.8 N on push at 0.7 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping or pressing stations fit into tight machine frames that a full-length cylinder cannot enter.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod with a female M12x1.75 thread, and 1/8" ports feed air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Because the -S magnet is fitted on this model, CMSE or DMSE reed and solid-state switches can be clipped anywhere along the body slots for end-of-stroke signalling. Plan real work at roughly 2356 N at 0.5 MPa, which is about 240 kg of horizontal push, and expect it to lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is a stop pad, not a mid-stroke lock, so the rod still drifts if air is lost.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S Is Used
Heavy fixture clamping on CNC machining lines
The 3927 N push at 0.5 MPa seats large aluminium castings into milling fixtures, and the 10 mm stop window lets one cylinder serve two casting heights without re-plumbing.
Press-fit stations for bearing and bushing assembly
With about 2356 N of practical working force at 0.5 MPa, the 100 mm bore presses bearings into housings on automotive sub-assembly benches at 30-500 mm/s.
Lift-and-lower gates on pallet conveyors
Rated to lift about 200 kg vertically with a 2:1 margin, the cylinder raises heavy pallet stops, while the fitted -S magnet and CMSE switches confirm up and down positions.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S the Right Cylinder?
Size against neighbours: a 80 mm bore gives 2513.3 N push at 0.5 MPa while a 125 mm bore reaches 6135.9 N, so the 100 mm bore at 3927 N sits squarely in the heavy-clamp class. The 110 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so no made-to-order body is needed. The -10 window suits fixtures where the final position varies by a few millimetres between part types: wind the stop screw in and the extend stroke shortens within 10 mm, never beyond the ordered 110 mm. Mount on FA flange or LB foot to the ISO 21287 face, add I or Y rod knuckles where side alignment matters, and remember the adjuster is a mechanical end stop only - it does not hold a load against air loss. This unit already carries the optional -S magnet, so CMSE / DMSE switches work out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 110 mm extend stroke on site, so the working range is 100-110 mm. It shortens only - it cannot lengthen the stroke past the ordered value, and it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air pressure is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits guarded gantries and dense fixture plates. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots for end-of-stroke detection. FA flange and LB foot mountings bolt to the standard ISO 21287 face, and the 20 mm rod ends in a female M12x1.75 thread with 1/8" ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.