Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30
A double acting ISO 21287 compact cylinder, the ACEJ100X110-30 pairs a 100 mm bore with a 110 mm stroke that an external stop screw can trim on site by up to 30 mm, giving a usable extend range of 80-110 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body and S45C hard-chrome plated rod run at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits press fixtures and gantries where a full-length profile cylinder will not. For sizing, plan on roughly 2356 N (about 240 kg) of real work at 0.5 MPa, and expect it to lift about 200 kg vertically with a 2:1 margin. FA flange and LB foot mounts bolt straight to the ISO 21287 face; the optional -S magnet enables CMSE / DMSE switches, and this code has no magnet fitted.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 Is Used
Heavy press-fit clamping
The 3927 N push at 0.5 MPa seats bearings or bushings in automotive machining fixtures, with the stop screw trimming the extend stroke between 80 and 110 mm to match part heights.
Pallet lift-and-lower stations
With about 200 kg of vertical lift capacity at a 2:1 margin, the cylinder raises loaded pallets on packaging lines, the fixed TPU bumper softening each end of travel.
Gantry gate actuation
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting this 100 mm bore swing heavy machine guards inside tight gantry frames.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 the Right Cylinder?
At 3927 N push at 0.5 MPa this 100 mm bore sits well above the 63 mm size (1558.6 N push) and below the 125 mm size (6135.9 N push), so choose it for heavy clamping or lifting in the 200-400 kg class. If your load needs less than about 1550 N, step down to bore 63 and save air; if you need over 5497 N at 0.7 MPa, move to 125 mm. Remember the stop screw only shortens the extend stroke within the 30 mm window and is not a mid-stroke lock, so the rod still drifts if air is lost. Order FA or LB mounting to match your fixture, and add the -S code if CMSE / DMSE position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 110 mm extend stroke by up to 30 mm, so the working range is 80-110 mm. It is double acting, runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, and the stop is a mechanical end stop, not a load-holding brake.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod, 1/8" PT ports and a female M12x1.75 rod thread, about 50% shorter in mounting length than an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy. FA flange and LB foot mounts bolt to the standard ISO 21287 face. Position sensing needs the optional -S magnet code with CMSE / DMSE switches; this model, ordered without -S, carries no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X110-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.