Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100
A heavy-duty double acting compact cylinder built to ISO 21287, the ACEJ100X150-100 pairs a 100 mm bore with a 150 mm stroke that an external stop screw trims on site by up to 100 mm, giving a usable extend range of 50-150 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and the hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod stands up to continuous jig and press work. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits clamping stations and gantries where a full-length cylinder cannot. In practice, plan on roughly 2356 N of real work at 0.5 MPa, and the rod can lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, FA flange or LB foot mounts bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 Is Used
Heavy clamp fixtures on CNC machining lines
The 3927 N push at 0.5 MPa clamps steel castings in 4-axis fixtures, and the 50-150 mm adjustable range handles varied part heights without swapping cylinders.
Pallet lift-and-locate stations in automotive assembly
With about 200 kg vertical lift capacity at a 2:1 margin, the 100 mm bore raises engine pallets to locate pins while the short body fits under the deck.
Bench-top press and staking operations
Pushing up to 5497.8 N at 0.7 MPa, this cylinder stakes bushings and presses bearings in electronics and appliance sub-assembly cells.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 the Right Cylinder?
At this force class, step down to the 80 mm bore (2513 N push at 0.5 MPa) if your load is under about 250 kg, or step up to the 125 mm bore (6135.9 N push) for near-tonne pressing. The 100 mm bore suits 300-600 kg workpieces at 0.5 MPa. Note the stop screw sets the extend stroke only - it is not a mid-stroke lock, so on air loss the piston still drifts. Order the -S code if you need CMSE / DMSE position sensing, and pick FA flange or LB foot to match your fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 150 mm extend stroke by up to 100 mm, so the working range is 50-150 mm. It shortens the stroke only and never lengthens it past 150 mm.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to absorb end-of-stroke shock. FA flange and LB foot mounts bolt to the standard face. Position sensing requires the optional -S magnet ordered with the cylinder; with -S fitted, CMSE / DMSE switches mount in the body slots. This model has no magnet, so no sensor can be mounted unless you order the -S version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.