Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30
A double acting ISO 21287 compact cylinder, the ACEJ100X175-30 pairs a 100 mm bore with a 175 mm stroke and an external stop screw that trims the extend stroke by up to 30 mm on site, giving a usable range of 145-175 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body with a hard-chrome plated S45C rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits presses, gantries and fixture plates where a full-length profile cylinder will not. In practice, plan for roughly 2356 N of real work at 0.5 MPa, which lifts about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the rod ends in a female M12x1.75 thread with a 1/8" PT port. Note: this unit has no magnet fitted; order the optional -S code if you need CMSE / DMSE switch sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 Is Used
Fixture clamping on CNC machining centres
The 3927 N push at 0.5 MPa clamps heavy steel forgings in milling fixtures, and the 145-175 mm adjustable range adapts one cylinder to different fixture heights without re-plumbing.
Short-stroke press and staking station
With about 2356 N of practical working force at 0.5 MPa, this bore stakes bearings and press-fits bushings in automotive sub-assembly cells, fitting the tight envelope of a compact press head.
Pallet gate and heavy slide actuation
The 175 mm stroke swings pallet-line gates and actuates loaded slides in warehouse automation, lifting parts of about 200 kg vertically with a 2:1 margin at 0.5 MPa.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 the Right Cylinder?
At this force class the 100 mm bore delivers 3927 N push at 0.5 MPa. Step down to the 80 mm bore (2513.3 N push at 0.5 MPa) for lighter clamping, or up to the 125 mm bore (6135.9 N) when the load demands more. The 175 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so no made-to-order stroke is needed. The -30 stop screw shortens the extend stroke only within the 30 mm window; it is a mechanical end stop, not a mid-stroke lock, so the piston still drifts on air loss. FA flange or LB foot mounts and I/Y rod knuckles bolt to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 175 mm extend stroke by up to 30 mm, so the working range is 145-175 mm. It shortens the stroke only; it is an end stop, not a load-holding brake, and the piston still drifts if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod, female M12x1.75 rod thread and a 1/8" PT port. Sensing is not fitted as standard: this model has no magnet, so no switch can be mounted unless you order the optional -S code, which allows CMSE / DMSE reed or solid-state switches. FA flange and LB foot mounts plus I/Y rod knuckles bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X175-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.