Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S
The ACEJ100X200-100S is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 200 mm stroke down by up to 100 mm on site, giving a usable range of 100-200 mm without changing the cylinder. At the 100 mm bore this is serious force - 3927 N push and 3769.9 N pull at 0.5 MPa, rising to 5497.8 N at 0.7 MPa - yet the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping still fits a tight press frame or weld fixture.
This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be slotted onto the body for end-of-stroke signals. Plan on roughly 0.6 of the push rating as real work at 0.5 MPa - about 2360 N - which lifts around 240 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, the hard-anodized aluminium body runs on a 20 mm hard-chrome S45C rod, and air supply is 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S Is Used
Heavy press-frame clamping
The trimmed 100-200 mm stroke and 3927 N push at 0.5 MPa clamp thick steel weldments in a compact fixture where a full-length profile cylinder will not fit.
Pallet lift-and-lower stations
With about 240 kg of vertical lift capacity at a 2:1 margin, the 100 mm bore raises loaded pallets on conveyor transfer modules while the stop screw sets exact top-of-stroke height.
Gate and die-slide actuation
CMSE / DMSE switches on the -S magnet confirm open and closed positions on heavy die slides, and the LB foot mounting bolts straight into standard machine bases.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S the Right Cylinder?
Size against the load: the 80 mm bore gives 2513.3 N push at 0.5 MPa and the 125 mm bore gives 6135.9 N, so the 100 mm bore at 3927 N sits in the middle for heavy clamping and lifting. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve if the load must stay put. Mount with FA flange or LB foot on the ISO 21287 face, and keep the -S magnet in the order code if CMSE / DMSE position sensing is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -100 code is a 100 mm adjustment window: an external stop screw shortens the 200 mm extend stroke by up to 100 mm, so the working range is 100-200 mm. It shortens the stroke only - it never extends past the ordered stroke, and it is an end stop, not a load-holding brake. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guards. This model is ordered with the -S option, so the magnet is fitted and CMSE / DMSE reed or solid-state switches can be mounted in the body slots. A fixed TPU bumper at both ends absorbs end-of-stroke energy, and FA flange or LB foot mounts bolt to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.