Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S
This 100 mm bore ACEJ is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 200 mm stroke by up to 20 mm on site, giving a usable range of 180-200 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, rising to 5497.8 N at 0.7 MPa - a force class suited to heavy clamping and press-style work.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into deep presses and guarded stations where a full-length body will not reach. As a practical sizing guide, plan on roughly 2356 N (about 240 kgf) of real work at 0.5 MPa, and expect it to lift about 200 kg vertically once a 2:1 margin is applied. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted anywhere along the body slots.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S Is Used
Baling press platen
The 3927 N push at 0.5 MPa drives a small baling or briquetting platen, and the 180-200 mm adjustable window lets operators fine-tune compression depth without changing cylinders.
Pallet stamping station
In packaging lines, the 100 mm bore stamps batch codes or date marks into pallet blocks, lifting about 200 kg vertically with a 2:1 margin on part weight.
Fixture clamp on a machining centre
Mounted via an FA flange on a CNC fixture, it clamps cast housings with roughly 2356 N of usable force at 0.5 MPa while CMSE switches confirm clamp-complete.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S the Right Cylinder?
Size both ways before committing: a 63 mm bore ACEJ gives 1558.6 N push at 0.5 MPa, while the next step up, the 125 mm bore, reaches 6135.9 N - choose this 100 mm model when your load sits between roughly 1400 and 2400 N working force. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add a separate valve or lock for load holding. Mounting options include FA flange and LB foot plus I/Y rod knuckles on the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke signalling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 200 mm extend stroke on site, so the working range is 180-200 mm. It cannot lengthen the stroke past the ordered 200 mm, and the stop is a mechanical end stop, not a load-holding brake.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be slid into the body slots for position signals. FA flange, LB foot and I/Y rod knuckles bolt straight to the ISO 21287 face; ports are 1/8" PT, pressure 0.15-1.0 MPa (22-145 psi) and speed 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.