Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S
The ACEJ100X200-30S is a double acting ISO 21287 compact cylinder with a 100 mm bore and a 200 mm stroke that an external stop screw trims by up to 30 mm, giving a usable extend range of 170-200 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and at 0.7 MPa the push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. As a rule of thumb, plan on about 2356 N of real work at 0.5 MPa, which corresponds to lifting roughly 200 kg vertically with a 2:1 margin.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore unit fits heavy clamping stations and gantries where a full-length profile cylinder will not. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, a fixed TPU bumper sits at both ends, and the fitted -S magnet lets CMSE / DMSE reed or solid-state switches report end positions. Operating range is 0.15-1.0 MPa (22-145 psi) with 30-500 mm/s speed.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S Is Used
Heavy fixture clamping
Trims the clamp stroke between 170 and 200 mm on machining-centre fixtures, using about 2356 N of usable force at 0.5 MPa to hold steel castings through milling cuts.
Pallet lift-assist station
The 3927 N push at 0.5 MPa lifts roughly 200 kg vertically with a 2:1 margin, ideal for raising palletized loads in a warehouse pick cell.
Press-fit assembly gantry
Fits a short-stroke press gantry where the ISO 21287 body saves about 50% of the length of an ISO 15552 profile cylinder, delivering 5497.8 N at 0.7 MPa for bushing insertion.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S the Right Cylinder?
Size against neighbours: a 80 mm bore pushes 2513.3 N at 0.5 MPa, while a 125 mm bore reaches 6135.9 N, so the 100 mm bore at 3927 N sits in the middle for heavy press or lift duties. Remember the stop screw is a mechanical end stop for the extend stroke only - it does not lock the piston mid-stroke, and on air loss the rod still drifts. FA flange or LB foot mountings bolt to the ISO 21287 face, the rod end is female M12x1.75, and the fitted -S magnet accepts CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S FAQ
This 100 mm bore double acting cylinder pushes 3927 N and pulls 3769.9 N at 0.5 MPa, and pushes 5497.8 N at 0.7 MPa, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The extend stroke is adjustable from 170 to 200 mm via the external stop screw (-30 window), speed is 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), and the air port is 1/8" PT with a female M12x1.75 rod thread.
It is an ISO 21287 compact cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, hard-chrome S45C rod and a fixed TPU bumper at each end. The fitted -S magnet allows CMSE / DMSE reed or solid-state switches on the body slots, and FA flange or LB foot mountings bolt straight to the ISO 21287 face. The stop screw only shortens the extend stroke; it never holds a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.