Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30
This 100 mm bore ACEJ is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 225 mm stroke down by up to 30 mm, giving a usable range of 195-225 mm without changing the order code. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so heavy clamping fits inside tight machine frames.
For real-world sizing, plan on roughly 2356 N of usable push at 0.5 MPa (about 60% of the rating), which lifts about 200 kg vertically with a 2:1 margin. The hard-anodized aluminium body carries the 20 mm S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 Is Used
Heavy press-frame clamping
The 3927 N push at 0.5 MPa clamps steel weldments in automotive press fixtures, and the 195-225 mm adjustable window lets one cylinder serve several die heights.
Pallet gate and stopper actuation
With about 200 kg of vertical lift capability at a 2:1 margin, this bore raises loaded pallet stops and lift gates on warehouse conveyor lines.
Scrap and bin compactor rams
The 225 mm stroke drives compactor plates inside compact machine enclosures, where the short ISO 21287 body replaces a full-length profile cylinder.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 the Right Cylinder?
At this force class the 100 mm bore delivers 3927 N push and 3769.9 N pull at 0.5 MPa (5497.8 N push at 0.7 MPa, up to 800.9 kgf theoretical at 1.0 MPa). If your load is under about 2500 N, the 80 mm bore (2513.3 N push) is cheaper; if you need more, the 125 mm bore reaches 6135.9 N. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a valve or external lock if the load must be held. FA flange or LB foot mounting bolts to the ISO 21287 face, and order the -S code if CMSE / DMSE position sensing is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N (pull 5277.9 N). Theoretical maximum at 1.0 MPa is 800.9 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C. The stop screw trims the extend stroke anywhere in the 30 mm window (195-225 mm).
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, threaded aluminium covers, a 20 mm hard-chrome-plated S45C rod, and fixed TPU bumpers at both ends that absorb end-of-stroke energy. The body saves about 50% of the mounting length of an ISO 15552 profile cylinder. The magnet is not fitted as standard - order the -S code to enable CMSE / DMSE switches. Rod end is female M12x1.75, air port is 1/8" PT, and FA flange or LB foot mounts bolt straight on.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X225-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.