Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10
The AirTAC Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 is a genuine double acting, adjustable stroke ISO 21287 compact air cylinder with a Ø100mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10
A double acting ISO 21287 compact cylinder, the ACEJ100X50-10 pairs a 100 mm bore with a 50 mm stroke that an external stop screw trims on site: the -10 code gives a 10 mm window, so the usable extend range is 40-50 mm. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits heavy presses and clamps built into tight machine frames.
Plan real work around roughly 2356 N at 0.5 MPa rather than the full rating, which is about 240 kg of vertical lift with a 2:1 margin. The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, a fixed TPU bumper sits at both ends, and the optional -S magnet lets CMSE / DMSE switches report end positions - without the -S code there is no magnet.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 Is Used
Pneumatic press station
A short-stroke forming or marking press on an assembly line, where 3927 N at 0.5 MPa swages terminals and the 40-50 mm adjustable range lets technicians dial in the die depth without changing the cylinder.
Heavy fixture clamping
Clamping steel castings on a machining centre fixture: the compact body fits inside the fixture wall, and the stop screw sets a repeatable clamp position within the 10 mm window.
Pallet gate actuator
Swinging or lifting a heavy gate arm on a palletizing conveyor, where the 100 mm bore delivers the torque through a short lever and the 1/8" port keeps flow losses low at 30-500 mm/s.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 the Right Cylinder?
At this force class the step down is the 80 mm bore (2513 N push at 0.5 MPa) and the step up is the 125 mm bore (6135.9 N); pick the 100 mm when your clamp or press needs near 4 kN in a short envelope. The stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve for suspended loads. FA flange or LB foot mountings bolt to the ISO 21287 face, and order the -S code if CMSE / DMSE position sensing is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push is 5497.8 N and pull 5277.9 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 50 mm extend stroke to any length from 40 to 50 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/8" PT port and M12x1.75 female rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits deep inside guards and fixtures. A fixed TPU bumper at each end absorbs end-of-stroke energy but never locks or brakes a load. Position sensing requires the optional -S magnet ordered with the cylinder; only then can CMSE or DMSE switches be mounted in the body slots. FA flange and LB foot mountings bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ100X50-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.